Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Arlington
Air Duct Repair in Arlington typically runs between $450 and $1,800 depending on whether we’re sealing a separated joint, replacing a collapsed section, or rebuilding a failed return plenum. Most Arlington homeowners call us because airflow has dropped in one or two rooms, the system sounds louder than it used to, or utility bills have crept up without any change in usage. We know Arlington’s housing stock well, from the older ranch-style homes near Haller Park to the newer subdivisions pushing east toward the Arlington Municipal Airport and west along Highway 530. When you call (980) 447-2498, you’ll get a real person who can schedule a technician to come out, inspect the ductwork, and give you a written price before any work starts.
What makes our Air Duct Repair work different in Arlington is that we treat the whole system, not just the visible problem. A torn flex duct in the crawlspace often means debris has already circulated through the supply runs and collected in the return plenum. We inspect first, show you what we found with camera photos, then give you one flat price per repair. No per-foot surprises, no bait-and-switch.
Why Linden Air Duct Cleaning Is Arlington’s Preferred Air Duct Repair Company
Arlington homeowners call us for two reasons: we show up when we say we will, and we put the price in writing before any work begins. The technician who arrives at your door has been background-checked, identity-verified, and is the same person whose name and photo we sent you before the visit. When they ring the bell, they’ll hold up a photo ID badge. That’s the Threshold Standard, and it applies to every job we do in Arlington.
Led by Marcus Veale, our team has served homeowners since 2004 as part of the Threshold Group family. The crews that serve Arlington are dispatched from our Seattle office, but they know the local terrain: the older neighborhoods along 67th Avenue NE, the subdivisions off Arlington Heights Road, and the rural properties out toward Jim Creek and Burn Hill. We answer the phone with a live person 24 hours a day, seven days a week. No voicemail loops when you need to schedule an inspection or ask a question about a repair. Just a real human voice.
We’re independently owned and operated, which means the accountability flows through Marcus and the team, not through some distant corporate call center. When Arlington customers tell us what they liked about the job, they mention the same things: the tech called ahead, showed ID, explained what was actually wrong, and the final invoice matched the quote. That’s not a marketing slogan. It’s how we run every job in Arlington.
Duct Replacement in Arlington
Duct Replacement in Arlington usually means pulling out original fiberglass duct board or collapsed flex duct from homes built in the 1960s through the 1980s, then installing new R-8 insulated flex or sealed sheet-metal runs sized correctly for the system. These older Arlington tract homes were built fast, and the ductwork that went in on day one was never meant to run Air-conditioning nearly year-round for four or five decades. We see duct board that has delaminated and is shedding fiberglass into the air stream, flex duct that has torn at the takeoff collars, and return plenums so packed with debris that the blower motor is starving for air.
A full duct replacement in Arlington typically runs $1,200 to $3,800 for a single-story ranch, while larger split-level or two-story homes can range from $2,800 to $6,500, depending on accessibility in the attic or crawlspace. Those are honest whole-system ranges, not a per-vent teaser that becomes something else once the work starts. We give you a written quote before we touch anything.
Signs Replacement Beats Repair
If the duct board in your main trunk line has collapsed or degraded past the point where sealing and patching makes sense, replacement is the honest call. We don’t push replacement when a repair will hold. But when fiberglass particles are already circulating through the supply registers, patching just delays the problem. The same goes for flex duct that has torn in multiple places or sagged badly enough to restrict airflow by 40 percent or more. New ductwork is cleaner, quieter, and sized to the actual heating and cooling load of the room, which is something the original 1970s install rarely got right.
What We Replace and Why It Matters
We replace return plenums, trunk lines, branch runs, and takeoff collars. In Arlington homes from the mid-century boom, the return side is often the bigger problem: undersized, leaky, and pulling air from the crawlspace or attic instead of the conditioned rooms. A properly rebuilt return plenum improves airflow immediately and reduces the amount of dust and pollen the system pulls in. We use professional-grade equipment from Nikro and specify replacement materials that meet current code for insulation and sealing, not whatever was cheapest at the supply house in 1978.
Ductwork Installation in Arlington
Ductwork Installation in Arlington covers new construction additions, garage conversions, and homes where the original ductwork was never properly installed in the first place. We’ve worked on plenty of Arlington remodels where a previous owner added a room or enclosed a porch and tied the new supply run into the existing system with the wrong size flex, leaving the new space hot in summer and cold in winter. Proper installation means calculating the airflow needs of each room, sizing the branch runs correctly, and sealing every joint with mastic, not just foil tape.
New ductwork installation for a typical room addition in Arlington runs $900 to $2,200. A full system install in new construction or a full gut remodel ranges from $3,500 to $8,000 depending on square footage, the number of supply and return runs, and whether we’re working in an attic or crawlspace. We install R-8 insulated flex duct as our standard, upgrade to sealed metal where the application calls for it, and use air-quality products compatible with Honeywell and Aprilaire systems. Every job gets a written price before work begins, and every installation is covered by a written guarantee.
New Duct Runs for Additions and Remodels
When Arlington homeowners add a bedroom, convert a garage, or finish a basement, the existing HVAC system rarely has the capacity or duct layout to serve the new space properly. We’ll assess the current furnace or air handler, calculate the additional load, and run new ductwork that actually keeps the added space comfortable. That often means a new return as well, not just a supply run. Put a supply in without a dedicated return and the room pressurizes, doors slam, and the air handler works against itself.
Replacing Undersized or Leaky Runs
We see a lot of older Arlington homes where the original installer used 6-inch flex on runs that should have been 8-inch, or where joints have pulled apart over decades of thermal expansion. Replacing undersized runs and sealing leaks typically improves airflow by 20 to 30 percent, which you’ll feel in the rooms that have always been a problem. It also reduces the amount of conditioned air leaking into the attic or crawlspace, which shows up on the utility bill.
Trusted Brands We Service in Arlington
Our techs work on systems from the brands Arlington homeowners actually have installed, including Lennox service in Arlington,, and we stock common repair parts and materials for fast turnaround. We use Nikro extraction and agitation tools for source removal and air washing during repair jobs, and we’re compatible with Honeywell and Aprilaire filtration products when a homeowner wants to add better air cleaning at the equipment. If your system has an Abatement Technologies media cabinet or UV system, we can work around it and make sure the repair doesn’t compromise the air quality equipment you’ve already invested in. We don’t push a brand just because we carry it. We match the material and equipment choices to what your Arlington home actually needs.
Common Air Duct Repair Problems We See in Arlington Homes
- Delaminated fiberglass duct board in 1960-to-1990 tract homes. The original duct board used in Arlington’s boom-era subdivisions dries out and sheds fiberglass into the air stream over decades. The blower motor eats the debris and airflow drops even before the homeowner notices a problem.
- Return plenums packed with stadium-era construction dust. In south and central Arlington ZIPs within a mile or two of AT&T Stadium and Globe Life Field, we routinely pull out concrete and drywall dust that settled into return plenums during the multi-year build cycles. That debris never leaves on its own and restricts return airflow dramatically.
- Blackland Prairie clay dust clogging registers and grilles. Arlington sits on clay-heavy soil that dries to a fine, airborne powder each summer. That dust loads into grilles, registers, and duct interiors faster than in more northerly markets, choking airflow before the system shows any other sign of trouble.
- Collapsed flex duct in crawlspaces and attics. The first-generation flex duct installed in Arlington homes from the 1970s and 1980s often sags, tears, or collapses entirely. We find runs that are crushed flat or disconnected at the takeoff, which means the furnace or AC is conditioning an attic instead of a bedroom.
Pricing for Air Duct Repair in Arlington, WA
Air duct repair in Arlington runs $450 to $1,800 for most jobs. Sealing a disconnected joint or patching a small tear in a flex run sits at the lower end. Rebuilding a return plenum or replacing a collapsed trunk section sits higher. A full duct replacement in an older Arlington ranch typically runs $1,200 to $3,800 depending on layout, and we’ll always show you the camera images before we quote anything so you know exactly what’s wrong and why the number is what it is. Call (980) 447-2498 for a free estimate. We put the price in writing before any work begins, and you’ll never get a surprise invoice at the end.
We Also Serve Cities Near Arlington
Linden Air Duct Cleaning serves homeowners throughout northern Snohomish County. Along with Air Duct Repair in Arlington, we regularly work in Marysville, Granite Falls, Lake Stevens, and Stanwood. If you’re in one of those nearby communities and have questions about duct repair, air quality, or a system that isn’t cooling evenly, call us at (980) 447-2498. We’ll give you a straight answer and a written quote, same as we do in Arlington.
Serving Arlington, WA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Arlington
Most Arlington homes from that era should have their ducts inspected every 3 to 5 years and cleaned on the same interval, which is why many homeowners also schedule our Dryer Vent Cleaning in Arlington at the same time. The year-round HVAC cycling in North Texas means systems run almost non-stop from April through October, so dust, pollen, and clay particulate build up faster than in milder climates. If your home still has original duct board, inspection is more urgent because the material degrades with age and can shed fiberglass into the air stream. Call (980) 447-2498 and we’ll schedule an inspection and give you an honest assessment of whether cleaning or repair is the right call.
The multi-year construction cycles for AT&T Stadium and Globe Life Field threw massive volumes of concrete and drywall dust into the surrounding residential neighborhoods, and a lot of that fine particulate got pulled into nearby home HVAC systems. Return plenums in south and central Arlington ZIP codes are often packed with gray construction dust that homeowners didn’t know was there. It never leaves without source removal and agitation tools. If you live within a couple miles of the stadium district, that debris is likely in your return side right now.
Failed duct board delaminates, meaning the inner surface flakes away and the fiberglass mat breaks down, so particles circulate through the supply registers while airflow drops. Small isolated areas can sometimes be sealed and patched, but when the board has collapsed in the main trunk or degraded over a long run, replacement is the honest fix. We’ll show you camera images before we quote anything so you’re never making a repair decision blind.
The clay soil that underlies much of Arlington dries to a fine airborne powder during summer droughts, and that dust loads into return grilles, registers, and duct interiors faster than in cities with denser, less powdery soil. Homes near open fields or unpaved access roads get it even worse. That dust layer traps moisture, clogs filtration, and forces the blower motor to work harder, which accelerates wear on older ductwork. Regular source removal and seal repair keeps the system breathing and reduces the dust load on your furnace or air handler. Call (980) 447-2498 to schedule an assessment.
A MERV-rated filter and regular cleaning will slow the debris load and improve indoor air quality, but they won’t stop original duct board from delaminating or stop old flex duct from collapsing. The failure modes in Arlington’s 1960-to-1990 housing stock are material-age failures, not just dust problems. A good filter helps the HVAC equipment last longer and keeps the air cleaner, but if the ductwork itself is breaking down, replacement is the only permanent solution. We’ll tell you which one applies to your home after we inspect it.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Arlington since 2004.