Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Medina
Air duct repair in Medina typically runs $290 – $680 for most homes, with collapsed flex duct replacement and trunk line repairs making up the bulk of what we do. That’s the honest range before we look at your system. Call (980) 447-2498 and we’ll give you a written price before any work starts.
Most Medina homeowners don’t think about their ducts until a room won’t heat or a register starts puffing dust. By then, the problem’s usually been building for months. We work the full length of Medina, from the waterfront estates off Evergreen Point Road to the newer subdivisions east of 92nd Avenue NE, and we know what the housing stock here throws at a duct system. Marcus Veale leads our repair team, and he’s spent years tracing airflow problems in Medina’s peculiar mix of high-end remodels and builder-grade tract work. If your ducts are leaking, collapsed, or packed with construction debris, we’ll find it and fix it.
Key Takeaways:
- Repair pricing in Medina runs $290 – $680 for most jobs, quoted in writing before work begins.
- Brand-new Medina homes often have construction debris packed in the ducts before move-in.
- Every repair carries the 365-Day Done Right Promise in writing.
- Technicians are background-checked, photo-badged, and introduced by name before arrival.
Why Linden Air Duct Cleaning Is Medina’s Preferred Air Duct Repair Company
We’ve been doing Air Duct Repair long enough to know that Medina presents a specific set of problems. The older homes near the waterfront have retrofit ductwork that snakes through finished spaces in ways no modern builder would attempt, while the newer construction off NE 24th Street hides builder-grade flex duct that was marginal on day one. Neither problem responds to a one-size-fits-all approach.
Medina homeowners call us because we send the technician’s name and photo before the visit. The tech shows a photo ID badge at the door, every time. That’s the Threshold Standard, and it matters in a town where letting a stranger into the house is a real decision. You’ll know exactly who’s walking up your driveway before they ring the bell.
Our repair work comes with the 365-Day Done Right Promise: if a covered repair fails within a year, we come back at no charge. That’s written on every invoice. No fine print, no phone menu to fight through. A live person answers when you call, day or night.
Ductwork Installation in Medina
Ductwork Installation in Medina often means replacing builder-grade flex runs in newer homes, not just patching leaks in older ones. The tract developments that went up around Medina during the last two decades used flex duct that’s now hitting the point where sagging and separation show up together. We replace those runs with properly sized, properly supported duct that won’t choke airflow to the far bedrooms.
Full ductwork replacement in Medina costs more than repair, typically $1,800 – $4,200 depending on home size and access. That’s a real number, not a teaser. We put the full price in writing before the first tool comes off the truck.
Supply and Return Replacement
A supply run that’s collapsed or separated is starving the room it serves. We cut the old run out, verify the static pressure at the plenum, and install new duct sized to the actual room load, not whatever the builder had in the warehouse that week.
Trunk Line Repairs and Modifications
When the main trunk is the problem, patching it is usually a waste of your money. We’ll tell you straight if a section needs replacement versus a repair, and we’ll show you photos of what we found before we ask you to spend a dollar on the fix.
HVAC Duct Installation in Medina
HVAC Duct Installation in Medina covers the whole path: plenum connections, branch runs, takeoffs, register boots, and return air. New-build Medina homes frequently ship with flex duct that was never properly pulled tight, and a kink at a framing bay can reduce airflow to a bedroom by half while the furnace runs constantly trying to compensate.
Expect HVAC duct installation work in Medina to run $1,500 – $3,800 for a partial system replacement. A full system in a larger Medina home runs higher. Factor in access: crawlspaces on the newer east side are tighter than the full basements common elsewhere in the county, which adds labor time.
Return Air and Plenum Sealing
Medina’s damp shoulder season air gets pulled into return plenums that were never sealed from day one. We rebuild those connections with mastic and mechanical fasteners, not tape, so the air your system pulls in actually comes from the return grilles, not the crawlspace.
Flex Run Corrections
Sagging flex duct isn’t just an airflow problem; it’s a condensation and mold risk in Medina’s humidity. We re-support and re-pull runs using industry-standard strapping, and we do not reuse kinked sections. Once a flex run has been pinched long enough, the inner liner is permanently deformed.
Trusted Brands We Service in Medina
We work on and install equipment from Rotobrush, Aprilaire, and Abatement Technologies. That matters when we’re repairing a system in a Medina home: replacement media for Aprilaire cabinets is something we carry on the truck, not something that requires a second visit. When we rebuild a return plenum or add filtration at the air handler, we’re using products rated for this climate, not whatever was cheapest at the supply house. That’s a practical difference on a damp Medina morning when the heat kicks on and the air smells wrong.
Common Air Duct Repair Problems We See in Medina Homes
- Construction debris packed in new ducts. New-build Medina homes routinely have drywall dust, sawdust, and drywall chunks in the supply runs because builders don’t run a post-construction NADCA-standards cleanup. The standard 1-inch filter can’t capture fine gypsum dust.
- Sagging builder-grade flex duct. In the newer tract developments, kinked or sagging flex runs cut airflow to the farthest bedrooms. Homeowners often misdiagnose it as a furnace problem when the duct itself has collapsed.
- Mold in poorly sealed return plenums. Medina’s persistent low-cloud humidity keeps crawlspaces damp. When returns aren’t sealed, that moist air gets pulled into the duct interior, and the musty smell owners blame on carpet is actually the ductwork.
- Shipping caps and debris left in boots. We regularly find builder’s shipping caps half-seated inside register boots in Medina’s newer subdivisions. They restrict airflow from the day you move in, and no amount of thermostat adjusting will fix them.
Pricing for Air Duct Repair in Medina, WA
Air duct repair in Medina runs $290 – $680 for typical jobs: patching leaks, replacing a section of flex run, resealing a plenum, or clearing a debris-packed boot. Replacing multiple collapsed runs or rebuilding a trunk section runs higher, typically $800 – $1,600. Full ductwork replacement in a larger Medina home runs $1,800 – $4,200.
What affects the price here is access. Medina’s newer homes have tight crawlspaces, and the older estates have finished walls hiding duct runs that were never designed for replacement. Both add labor. What doesn’t change is our pricing policy: one written price per job, agreed before work starts. Call (980) 447-2498 and we’ll quote it straight.
We Also Serve Cities Near Medina
If you’re looking for air duct work in Medina or just across the water, our crews serve Bellevue, Kirkland, Mercer Island, and Seattle. The geography of the Eastside means we can typically route a Medina call alongside neighboring service areas without long waits. If your home is in Medina or a few minutes away, the same technician, same written pricing, and same guarantee apply.
Serving Medina, WA - Our Local Coverage Area
We’re based in the Medina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Medina
Yes, and it’s not your fault. In Medina’s new-build subdivisions, construction drywall dust, sawdust, and drywall chunks are typically left in the supply and return ducts because the builder never ran a post-construction cleanup. Your standard 1-inch filter can’t capture fine gypsum dust, so the debris stays right where it landed, blowing into your rooms every cycle. Call (980) 447-2498 and we’ll inspect your system and show you what’s in there before we quote anything.
The builder should have run a full post-construction duct cleaning to NADCA standards before handover, including source removal of drywall dust and debris, plus verification that no shipping caps or construction waste remained in the runs. Most Medina builders skip this step entirely because it’s not visible to the buyer at walkthrough. The good news is that it’s completely correctable, and we do it regularly for Medina homeowners who never got a clean system.
Medina’s damp shoulder-season air migrates into poorly sealed return plenums in newer crawlspaces, letting mold colonize the duct interiors. The musty odor you smell is the ductwork, not the carpet or the crawlspace itself. Sealing the returns and cleaning the contaminated duct surfaces resolves it, and we’ll show you before-and-after photos of the work so you know it was actually done.
Yes, absolutely. Flex duct that wasn’t pulled tight and properly strapped during construction will sag or kink within the first couple of years, cutting airflow to far rooms. A kinked run isn’t a cleaning problem; it’s a repair or replacement problem. We find shipping caps still seated inside boots and flex runs pinched at framing bays in Medina’s newer subdivisions all the time.
Construction dust is fine, white, and continuous: every register in the house produces it, and it reappears within a day or two of cleaning. Normal household dust is darker and accumulates more slowly. If it smells like fresh drywall or spackle and every register is puffing white powder, that’s construction debris still in your supply runs. Call (980) 447-2498 for a free inspection and we’ll tell you exactly what you’re dealing with.
Why a New Medina House Often Needs Duct Work Sooner Than Expected
Here’s what catches most Medina homeowners off guard: in the new-build subdivisions, the ducts are typically buried behind drywall before the first HVAC cycle runs. Construction drywall dust, sawdust, and drywall chunks from the build aren’t caught by the builder’s standard filter. The system runs, and a house that’s only months old can already have a supply run packed with debris the owner assumes will “settle out.” It won’t. It’s got nowhere to go except into your rooms.
One family in the new-build section off Medina’s east side called because every register in the house was puffing fine white dust and the family room smelled like fresh drywall. Our tech pulled the main trunk at the air handler and found drywall chunks and construction sawdust packed against the first takeoff, then ran camera inspection down each branch. Several flex runs still had the builder’s shipping caps half-seated inside the boot. We completed source removal with HEPA filtration and negative pressure, replaced the builder-grade return filter with a properly sized Aprilaire media cabinet, and the dust complaints stopped within a day.
This is a Medina problem specifically. Most of the country isn’t living in a three-year-old tract build with ducts sealed inside walls before anyone tested them. Your home might be brand new and already need duct repair or a proper post-construction cleaning, and that’s not a reflection on your housekeeping. It’s a reflection on what the builder didn’t do.
Call (980) 447-2498 for a free estimate. We’ll put the price in writing before any work begins, and every repair carries our 365-Day Done Right Promise.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Medina since 2004.