Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Repair Across Missouri City
Air duct repair in Missouri City usually runs between $300 and $850 for a single failed run of flex duct, while a full HVAC duct installation or replacement in a larger home can fall between $2,800 and $7,500. Most jobs we handle in Sienna, Quail Valley, and Riverstone are completed in one visit because we stock R-8 flex duct, takeoffs, mastic, and sheet-metal fittings on our trucks before we leave the shop. If you’re seeing gray fuzz blowing out of your registers, rooms that never reach the set temperature, or dust settling back on furniture days after you clean, call (980) 447-2498 and we’ll send a technician who knows Missouri City’s housing stock.
Something specific about this area: a lot of the homes here were built between the late 1980s and the 2010s, and the original flex duct in the 1990s and early-2000s builds is now cracking from two decades of attic heat. Repairing a duct in Missouri City often means the liner has failed, not just the outer jacket. That changes how we approach the job, and it’s why we camera-scope first instead of guessing.
Why Linden Air Duct Cleaning Is Missouri City’s Preferred Air Duct Repair Company
We’ve worked in Missouri City long enough to know the difference between a Quail Valley home built in 2001 and a Riverstone build from 2015. The ductwork ages differently. Quail Valley is where we see original mylar-lined flex duct with cracked inner liners. Riverstone is where we see ducts that were never cleaned at handover and have been moving drywall dust through the system since the first cooling season. Neither problem shows up the same way in Sugar Land or Fresno, and a technician who only knows one of those failure modes will misdiagnose the other.
Every technician we send into Missouri City is background-checked, identity-verified, and photo-badged under the Threshold Standard. Before the visit, you receive the tech’s name and photo. At the door, they show a photo ID badge. That’s not a special request. It’s how every job works.
Our pricing is put in writing before any work begins. When we quote a repair on a Sienna home, that number is the number. There’s no per-vent add-on, no “your plenum needs extra treatment” surprise after the fact. And every repair carries a 365-Day Done Right Promise in writing. If a covered repair fails within that year, we return at no charge. Marcus Veale, who leads our team, set that standard so homeowners never have to wonder whether the guarantee will actually be honored.
HVAC Duct Installation in Missouri City
HVAC duct installation in Missouri City is usually the right call when the existing duct system has failed beyond a point where patching makes sense, or when an addition changes the airflow requirements of the home. In practice, most of the installations we do here involve replacing failed runs of flex duct in Sienna and Quail Valley homes built in the 1990s and early 2000s. The original duct has cracked liners, collapsed under attic heat, or been pulled apart by rodents, and the homeowner is tired of paying to cool the attic. A complete installation runs $2,800 to $7,500 depending on the home’s square footage, number of runs, and how much of the existing sheet-metal trunk can be reused. We install R-8 insulated flex duct, seal every takeoff with mastic, and balance the system so each room actually receives the airflow it should.
Master-Planned Community Builds
Sienna, Riverstone, and the newer sections of Missouri City were built in phases, often by production builders who left construction debris in the ducts. We regularly find drywall chunks, sawdust, and scraps of strapping in systems that are only a year or two old. If you’re having new duct installed, we’ll camera the existing boots and trunk first to confirm what actually needs replacing, then install only what’s required.
New duct installation also makes sense when a home undergoes a large remodel. If walls are opened and rooms reconfigured, the old duct layout rarely matches the new floor plan. We’ll run a Manual J load calculation to size the new runs correctly rather than eyeballing it.
Attic Heat and Duct Sizing
Missouri City attics routinely exceed 140°F in the summer. Undersized or poorly routed flex duct will lose a large share of its cooling capacity in that environment before the air ever reaches the register. When we install new duct in Missouri City, we account for that thermal load and route runs to avoid sharp bends and long horizontal stretches across the hottest part of the attic.
Air Duct Replacement in Missouri City
Air duct replacement in Missouri City is something we recommend more often than repair, because the dominant housing stock here is hitting an age where the original flex duct is past safe use. A 1998 home in Quail Valley likely has mylar-lined flex duct that has been baked by more than twenty Missouri City summers. The inner liner cracks, sheds fibers into the airstream, and lets moist attic air into the supply run. Patching that duct rarely holds, because the material around the patch is just as brittle. Replacing a single failed run costs $300 to $850, including the new R-8 flex duct, takeoff, hangers, and mastic sealing. Replacing every run in a 2,500-square-foot home typically lands between $4,200 and $7,500.
Post-Harvey Duct Failure
In the Sienna and Quail Valley flood footprint from Hurricane Harvey, we see duct systems where the air handler cabinet and return plenum were never included in the original remediation scope. The walls and flooring were replaced, but the duct system kept circulating residual mold spores for years. If the inner liner of that duct shows microbial staining or the insulation has wicked moisture, replacement is the only way to remove the contamination from the airstream. Cleaning will not fix water-damaged insulation.
When Repair Still Makes Sense
If the duct is under ten years old and the failure is localized, a targeted repair often works well. A crushed run over the garage, a disconnected takeoff, a tear from a pest getting into the attic space. We’ll isolate the problem run, confirm the rest of the system is intact with a camera scope, and repair only what failed. Newer duct in Riverstone and parts of Sienna built after 2010 is often worth repairing, because the material itself hasn’t reached end-of-life.
Duct Replacement Costs in Missouri City
Line-item costs for typical Missouri City duct replacement work:
- Single flex duct run replacement (R-8, includes takeoff and mastic): $300 to $850
- Return plenum replacement: $450 to $1,200
- Supply trunk line replacement (per linear foot, sheet metal): $18 to $28
- Full flex-duct replacement, single-story 2,000 – 2,500 sq ft home: $3,800 to $6,200
- Full flex-duct replacement, two-story home with multiple zones: $5,500 to $7,500+
Every price is written down before we start. That’s a standing rule, not a preference.
Trusted Brands We Service in Missouri City
We run Rotobrush and Nikro equipment on Missouri City jobs, and we keep replacement parts and materials on our trucks so we don’t have to leave mid-repair to chase a fitting. If your system uses air-quality products from Abatement Technologies or Guardsman, we service those and can replace inline components without swapping out the whole setup. The goal is to restore your system to working condition the same day, not to sell you a brand you didn’t ask for. We arrive with what Missouri City homes actually need.
Common Air Duct Repair Problems We See in Missouri City Homes
- Cracked mylar liners in original flex duct. Quail Valley and Sienna homes built from roughly 1995 to 2005 often still have the builder’s original flex duct. Attic heat above 140°F breaks down the liner, and gray fiber fuzz starts blowing out of the registers.
- Drywall dust and debris left at handover. New Riverstone and Sienna homes frequently have construction debris in the supply and return ducts from day one. The builder’s HVAC scope rarely includes a final duct clean, so that dust re-enters the home every time the blower runs.
- Disconnected or leaking takeoffs. We find runs that have slipped off the takeoff collar or were never sealed with mastic. The system is blowing conditioned air into the attic and pulling 90% humidity air back into the supply stream.
- Post-Harvey contamination left in ductwork. In the 2017 flood footprint through southwest Fort Bend County, many remediations replaced walls and flooring but skipped the air handler and return plenum. The duct system kept circulating mold spores through the house for years afterward.
Pricing for Air Duct Repair in Missouri City, TX
A single duct run repair in Missouri City typically costs $300 to $850. A full duct replacement in a 2,500-square-foot Sienna or Quail Valley home runs $4,200 to $7,500. The big variables are how many runs have failed, whether the trunk line is salvageable, and how much of the duct is accessible from the attic versus behind finished surfaces. Homes built after 2010 with localized damage sit at the lower end. Homes with original 1990s duct and signs of liner failure sit higher, because we’re replacing, not patching.
Call (980) 447-2498 for a written estimate. It’s free, and the price we quote is the price you pay.
We Also Serve Cities Near Missouri City
Our Air Duct Repair team works throughout southwest Fort Bend County and the surrounding area. If you’re in Stafford, Sugar Land, Fresno, or Bellaire, we bring the same written pricing, Threshold Standard technician verification, and 365-Day Done Right Promise to your door. Learn more about our local coverage on our Missouri City page, or call and ask if we serve your street.
Serving Missouri City, TX - Our Local Coverage Area
We’re based in the Missouri City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Missouri City
Builders in master-planned communities like Sienna and Riverstone rarely clean the ducts before handover, so drywall dust, sawdust, and construction scraps stay in the system from the day you close. When your AC runs through its first Missouri City summer, that debris gets pulled through the blower and pushed out of every register. A camera inspection usually shows exactly what was left behind, and in most cases we can clean or replace the affected runs the same trip.
If you’re dealing with this, call (980) 447-2498 and ask for a duct camera inspection. We’ll show you what’s actually in there before we quote any work.
Most 2001-era Quail Valley homes still have the original mylar-lined flex duct, and by now that liner is typically cracked from twenty-plus summers of 140°F attic heat. If the liner has failed, aggressive cleaning will puncture it further and make the problem worse. The right first step is a camera scope to check the liner’s condition. If it’s intact, cleaning is fine. If it’s cracked or shedding fibers, replacement is the only responsible fix.
We’ll show you the camera footage either way so you can see for yourself. Call (980) 447-2498 to schedule a scope.
Yes, in many cases. We still find Sienna and Quail Valley homes where the flood remediation replaced drywall, flooring, and baseboards, but never opened or cleaned the air handler cabinet, return plenum, or duct runs. That means moisture and microbial contamination from 2017 stayed in the duct system the whole time. If your ducts haven’t been scoped since Harvey, this is worth checking before another cooling season pushes those particles through the house.
Call (980) 447-2498 and mention Harvey remediation. We’ll do a camera inspection of the duct system specifically, not just the house.
Missouri City sits in the Gulf Coast humidity band where relative humidity runs 75 to 90% through the long cooling season. Any leak at a duct connection pulls that moist attic air into the supply stream, which creates condensation inside the duct. That condensation feeds mold and dust mite buildup faster than in drier Texas markets like Dallas or San Antonio. A small leak here is a bigger deal than the same leak in a dry climate.
If you suspect a leak, call (980) 447-2498. We’ll find it with a pressure test and scope, then quote a written repair.
Most builder HVAC scopes stop at the equipment: the air handler, the condenser, the thermostat. They don’t include a final duct cleaning, they don’t camera-scope the runs, and they don’t seal every takeoff with mastic. In practice, that means a new Sienna or Riverstone home can have drywall chunks in the supply boots and unsealed connections at the plenum on move-in day. The builder’s scope misses exactly the parts of the system that move the air you breathe.
We were called to a 2003 build in Sienna after the homeowner found gray fuzz blowing from her supply registers. Her HVAC tech flagged a crushed run over the garage. Camera inspection showed the original flex duct’s inner mylar liner had cracked along a 12-foot span and was shedding into the supply stream. We isolated the return with negative pressure, cut the failed run out, and installed a new R-8 flex duct with a sealed takeoff at the air handler. The home had never been duct-cleaned since handover, so construction dust from 2003 was still sitting in the boots. That’s not a rare find in Missouri City. It’s the norm for homes of that era.
If you want to know what’s actually in your ducts, call (980) 447-2498 for a free estimate and a camera inspection.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Missouri City and southwest Fort Bend County.




Before
After
Before
After
Before
After