Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Taylor
Air duct repair in Taylor typically runs $180 – $520 depending on what’s wrong, and most jobs are finished the same day our tech arrives. We work throughout Taylor, TX – from the older cotton-era streets off Main to the new subdivisions pushing east toward the Samsung site – and we know exactly what your ductwork is up against here. That’s the Blackland Prairie clay dust in older homes, and construction debris in the new ones. The two problems look nothing alike, and they need different fixes. Call (980) 447-2498 and we’ll talk through what you’re seeing.
Why Linden Air Duct Cleaning Is Taylor’s Preferred Air Duct Repair Company
We’re the Air Duct Repair team that shows up with a name and a face you already know. Before any visit, we send the technician’s name and photo to your phone. At the door, they present a photo ID badge. It’s a small thing that matters a lot in a town where people still know their neighbors, and it’s part of the Threshold Standard we’ve operated under since 2004. Marcus Veale leads our crew, and he holds every tech to that standard on every job in Taylor.
Taylor homeowners tell us the same thing: they want to know who’s walking through the door. We don’t blame them. Every technician is background-checked and identity-verified. You’ll get a written price before any work begins, and a written guarantee on every repair. If a covered repair doesn’t hold, we come back at no charge. That’s not a promotion. It’s how we’ve done business since day one.
Ductwork Installation in Taylor
Ductwork Installation in Taylor usually means one of two jobs: replacing collapsed or torn flex runs in a mid-century home, or correcting what a production builder left behind in a new one. In the eastern growth corridor subdivisions, we regularly find flex duct that was taped poorly, kinked behind framing, or left disconnected at the boot. That’s not wear and tear. That’s a handover problem. New duct runs in Taylor generally run $40 – $95 per run for materials and labor on a typical single-story system, with a full trunk-and-branch replacement on a 2,000-square-foot home landing between $3,800 and $7,200.
New Build Corrections
Builders install to code minimum, and drywall crews don’t cap registers when they sand. The result is fine joint-compound dust packed into brand-new supply and return runs. We inspect with a camera, show you what we found, and quote the fix before we touch anything.
Old Home Replacements
Homes built in the 1940s through 1970s around central Taylor often still have original galvanized runs or early flex that’s disintegrating. Pinched returns, collapsed insulation liners, and rust at the plenum connections are the usual calls. We replace what’s failed and leave the rest alone.
HVAC Duct Installation in Taylor
HVAC Duct Installation in Taylor covers the full run from the air handler to the register boot, sized correctly for the system and sealed to stop leakage. We see this need most often in two Taylor situations: a homeowner adding central air to a 1950s house that originally ran window units or floor furnaces, and a new subdivision house where the builder’s sub re-used whatever flex was on the truck regardless of the load calculation. Whole-system duct installation in Taylor runs $4,200 – $8,500 depending on square footage, number of runs, and access.
Sizing and Sealing
Undersized or poorly sealed duct is why a new Taylor house can have hot and cold rooms even with a brand-new condenser. We size runs to the room load and seal every connection with mastic, not tape. We also check return air capacity, because a starved return in a tight new build is a common cause of short-cycling and blower motor failure.
When the Build Wasn’t Finished
We’ve walked into Taylor homes where the flex runs were literally lying on the attic insulation, not hung. That causes kinks, airflow collapse, and condensation. Our HVAC duct installation work includes hanging runs properly and correcting plenum connections the builder left loose. No upcharge mystery, no upsell. Just written pricing before we start.
Trusted Brands We Service in Taylor
We’re set up to service what Taylor homes actually have. That means Rotobrush and Nikro equipment on our trucks for source-removal cleaning, and Aprilaire and Abatement Technologies products when you want better filtration after the ducts are clean. If your home has an Aprilaire media cabinet or a UV system from a previous install, we service it as part of the job. We also keep common Guardsman and Aprilaire filter sizes in stock for Taylor homeowners, which cuts turnaround time when a repair exposes a filtration gap. For laundry vent maintenance, see our Dryer Vent Cleaning - Taylor service. You won’t hear us tell you to rip out a system that works. We fix and clean what’s there.
Common Air Duct Repair Problems We See in Taylor Homes
- Builder debris in brand-new systems. Drywall sanding dust, joint-compound fines, and sawdust get sucked into supply and return runs during construction because trades rarely cap registers. The dust then cakes the blower motor and coats every surface in the house.
- Disconnected or loosely taped flex runs. In new Taylor subdivision homes, we find runs that were taped at the boot but never properly sealed, or pulled apart during insulation work. Air leaks into the attic, rooms don’t heat or cool evenly, and dust gets pulled in through the gaps.
- Decades of Blackland clay compaction. Older Taylor homes on the town’s expansive clay soil pull mineral-heavy dust through leaky return paths. That dust settles in low spots in the ductwork and bakes onto the walls of the runs over summer, narrowing airflow year after year.
- Oversized gravity returns choking on 70 years of debris. The mid-century homes in Taylor’s central neighborhoods often kept their original gravity return chases. They’re impossible to clean properly without source-removal equipment, and they hold layers of cedar pollen, clay dust, and sometimes old insulation from attic renovations.
Pricing for Air Duct Repair in Taylor, TX
Here are the honest numbers for Taylor. Patching or replacing one flex run runs $180 – $360. Sealing and mastic work at the plenum or boot connections runs $220 – $480 depending on how many joints need attention. Camera inspection before and after is included in every repair at no extra charge. If you need several runs replaced or a return enlargement, expect $600 – $1,800. A full duct replacement in a 2,000-square-foot Taylor home runs $3,800 – $7,200. You’ll get a written price before any work starts, and every repair carries a written guarantee with a free second visit if it fails. Call (980) 447-2498 for a free estimate.
We Also Serve Cities Near Taylor
Linden Air Duct Cleaning serves Taylor and the surrounding communities, including Hutto, Pflugerville, Round Rock, and Georgetown. If you live just outside Taylor and need duct repair, cleaning, or dryer vent service, call us and we’ll schedule you with the same written-price guarantee.
Serving Taylor, TX - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Taylor
Yes, and sooner than you’d think. Builders rarely cap registers during drywall sanding and finish work, which means fine joint-compound dust, drywall fines, and sawdust get pulled into the supply and return ducts before you ever turn the system on. In Taylor’s new-build corridors east of downtown, we routinely find a layer of construction dust thick enough to coat the blower motor and recirculate through the house for months. We ran a camera inspection on a six-month-old home near the Samsung fab construction zone and found a half-inch of drywall dust caking the supply and return runs. A cleaning at month one beats a blower motor replacement at year five. Call (980) 447-2498 for an exact quote on your home.
That gray-white grit is an industrial construction signature, not a household dust problem. Taylor sits next to the Samsung semiconductor megafab site on the city’s northeast side, and homes closest to that buildout pick up a fine layer of silica and concrete dust that rides in on the wind and settles into ductwork through any unsealed gap. In older Taylor homes closer to Main Street, you’ll see the reddish Blackland Prairie clay dust instead. If you’re seeing both, your ducts are pulling from two sources at once. A MERV 8 filter can’t hold back either one. Call us and we’ll show you exactly what’s in your ducts with a camera inspection.
Duct cleaning removes the debris, pollen, and dust inside your existing ductwork using negative-pressure extraction with HEPA filtration. Duct repair fixes what’s physically broken: disconnected flex runs, loose plenum connections, kinked duct, collapsed liner, or failed sealing at the boots. In Taylor, many homes need both, especially new builds where the builder left debris in the ducts and also left flex runs taped loosely or hung improperly. We diagnose first with a camera inspection, then give you a written price for whatever the inspection shows. You only pay for what the camera proves. Call (980) 447-2498 to schedule.
Yes, if the cleaning removes the accumulated pollen base that’s already in your ducts. Central Texas cedar pollen season runs November through February, and Taylor’s mid-century homes with leaky return paths pull that pollen into the duct system where it settles and re-enters the living space every time the blower runs. A source-removal cleaning with HEPA filtration removes that base layer. We also recommend a better filter after cleaning, something like an Aprilaire MERV 13 media filter, because a standard 1-inch fiberglass filter won’t stop cedar pollen or the Blackland clay dust Taylor homes accumulate. Call (980) 447-2498 for a free estimate and we’ll check what your system can accommodate.
It likely is, and it’s one of the most common calls we get from Taylor’s new subdivisions. Tape alone doesn’t seal duct connections, especially at the plenum and register boots. Gaps open up, attic air gets pulled into the supply side, and dust from the construction site enters the system through every loose joint. We find this in a large share of the six-month-old homes we inspect near the eastern growth corridor. The fix is mastic sealing at every connection, proper hanging if the runs are lying on insulation, and then a full cleaning to remove what the leaks pulled in. Every repair carries a written guarantee. Call (980) 447-2498 for a free estimate.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Taylor since 2021 as part of a company operating to the Threshold Verified standard since 2004.