Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across San Bruno
Dryer vent cleaning in San Bruno typically costs $140 – $260 for a standard single-dryer home and takes about 60 – 90 minutes. We work throughout San Bruno, from the Crestmoor hills to the flats near San Bruno Avenue, and we know the housing stock here better than most. The salt-laden fog that rolls through the San Bruno Gap does not just haze the skyline. It clings to the inside of your dryer vent, mixing with lint to form damp clumps that clog runs months earlier than they would in San Jose or Fremont. If your dryer is taking two or three cycles to finish a load, call us at (980) 447-2498. We’ll give you a written price before any work starts.
Why Linden Air Duct Cleaning Is San Bruno’s Preferred Dryer Vent Cleaning Company
A lot of outfits offering Air Duct Cleaning in San Bruno treat the city as a satellite stop between San Francisco and the Peninsula. We do not. Our crews spend the bulk of their weeks in this city, which means we have seen every vent problem the Gap winds can throw at a homeowner.
When you book with us, you are not getting a random dispatcher’s roll of the dice. You receive the technician’s name and photo before the visit. When they knock on your door near Shelter Creek or off Sneath Lane, they are wearing a clean, marked uniform and holding a photo ID badge up to show you. That is the Threshold Standard, and it has been the foundation of our operation since 2004 as part of the Threshold Group family. Every technician is background-checked and identity-verified. What you see at the door is exactly who we said was coming.
San Bruno homeowners call us because neighbors have already vouched for the work. We are known in Crestmoor, Portola Highlands, and the old streets off El Camino Real for one thing: we show up, we quote honest numbers, and we leave the vent path confirmed clean with a camera. Not fogged. Not spot-vacuumed. Clean and documented.
Dryer Vent Cleaning Service in San Bruno
Dryer Vent Cleaning Service in San Bruno is not a once-a-decade chore here. The marine fog that funnels through the San Bruno Gap carries fine salt particles that settle on lint the moment it begins to accumulate. That salt absorbs moisture from the air, so lint clumps against the duct wall instead of drying and blowing clear. A standard clean in San Bruno runs $140 – $260 depending on run length and access. If the vent exits through the roof or runs more than 15 feet, expect the higher end.
Camera-Verified Lint Removal
We use negative-pressure extraction with rotating agitation tools, then run a camera through the full run to confirm the lint pathway is clear. You see the before and after footage yourself. That matters here because a partial clean in San Bruno’s damp air re-clogs within a single storm season: any lint left on the wall absorbs fog moisture and starts clumping again almost immediately.
Salt and Moisture Treatment
Where we find salt-crusted lint and microbial growth, we physically remove it with mechanical agitation. We do not fog the run with a so-called sanitiser and call it done. Fogging leaves the damp, salt-laden lint in place, so the musty smell returns within weeks. Source removal is the only fix that holds in San Bruno’s climate.
Dryer Vent Installation in San Bruno
Dryer Vent Installation in San Bruno is often the right move when the existing run is made from 1950s-era materials that were never meant to handle this much ambient moisture. If we find delaminated fiberglass duct board shedding fibers into the airflow, or a run so corroded from salt air that joints are failing, replacement is the honest recommendation. A new rigid metal vent run in San Bruno typically runs $180 – $420, depending on length, access, and whether we need to add wall or roof penetrations.
Rigid Metal Replacement
We install rigid metal ductwork, not flexible foil, wherever the route allows. Rigid metal resists the sag that traps lint and holds up far better against the constant damp pressurization this city’s wind patterns create. Every job includes a written price before we start, and the work is covered by our 365-Day Done Right Promise.
Vent Rerouting and Cap Replacement
Some older San Bruno homes route dryer vents into crawlspaces or terminate them under eaves where fog collects. We reroute those runs to terminate properly outside, then seal the old penetration. We also replace rusted vent caps with units that keep birds out while letting damp air escape correctly.
Trusted Brands We Service in San Bruno
Our crews run Rotobrush and Nikro equipment for extraction and inspection, and we work with air-quality components from Aprilaire, Abatement Technologies, and Guardsman where a home’s dryer vent system intersects with broader HVAC concerns. If you have a Guardsman vent cap that has rusted through after a few fog seasons, we can source and install a replacement quickly. Since our inventory flows through our Bay Area office that serves San Bruno directly, most common parts are on the truck when we arrive.
Common Dryer Vent Cleaning Problems We See in San Bruno Homes
- Salt-dampened lint plugs near the transition. The San Bruno Gap pushes marine fog through runs that would stay drier in South Bay cities. Lint here is often matted and heavy, not fluffy and easy to blow clear, and it clings to the duct wall within a few months.
- Fiberglass duct board shedding in post-WWII tract homes. Homes built between 1945 and 1965 near the El Camino Real corridor often still have original fiberboard duct runs. As the material delaminates, fibers mix with lint and restrict airflow in a way a shop-vac pass cannot fix.
- Musty airflow mistaken for ordinary lint buildup. The chronic marine layer keeps duct interiors damp, which promotes microbial growth. Homeowners often assume the smell means lint, but the actual driver is often biofilm on salt-coated lint. It has to be removed, not masked.
- Rusted vent caps and backdraft dampers. Salt air eats through cheap galvanized caps fast in San Bruno. A rusted flap that no longer seals lets fog, rain, and birds into the run year-round.
Pricing for Dryer Vent Cleaning in San Bruno, CA
Here is what we charge in San Bruno, based on the work we actually do here.
- Standard dryer vent cleaning (single dryer, accessible vent): $140 – $190
- Longer or roof-terminating runs, or significant salt clog removal: $190 – $260
- Vent cap replacement: $40 – $95, depending on cap type
- Bird guard installation: $55 – $120
- Rigid metal vent installation or reroute: $180 – $420
The price you are quoted is the price on the invoice. We do not charge per vent, and we do not write a teaser number that doubles once the tech is inside. Our Dryer Vent Cleaning team gives you one flat price per system before any work begins. Call (980) 447-2498 and we will give you an honest range for your specific home over the phone.
We Also Serve Cities Near San Bruno
San Bruno is the core of our Peninsula service area, but our crews also work regularly in Millbrae, South San Francisco, Pacifica, and Brisbane. Each of those cities sits in a slightly different wind and fog pattern, which changes how fast dryer vents load up. If you are in a neighboring city and your dryer is running long cycles, call us. We know the difference between Brisbane’s hillside air and South San Francisco’s industrial corridor, and we plan the cleaning accordingly.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in San Bruno
Because the San Bruno Gap funnels salt-laden marine fog through residential blocks at rates far above neighboring Peninsula cities, the lint in your vent becomes damp and clumps against the duct wall instead of drying and blowing clear. San Jose sits inland with much lower ambient humidity, so lint there stays dry and moves through. Here, the fog adds moisture and salt every single night, and the vent loads up months sooner. Call (980) 447-2498 and we can camera-inspect your run and tell you exactly how bad the buildup is, with a written price before any work starts.
No. Fogging deposits a masking odor on top of the damp lint, but it does not remove the salt-crusted lint, biofilm, or trapped moisture that is producing the smell. In San Bruno’s humid marine layer, the musty smell returns within weeks because the underlying conditions never changed. Source removal, meaning physical agitation and negative-pressure extraction that strips the lint and microbial growth off the duct wall, is the only fix that holds. We do the same kind of work as our Dryer Vent Cleaning process, but adapted to the specific salt and moisture conditions here. Call (980) 447-2498 for a quote that covers the actual removal work, not a fogging upsell.
Older post-WWII tract homes near the El Camino Real corridor often still have original fiberglass duct board that has delaminated and is shedding fibers into the dryer vent run. If your laundry room has developed a faint musty smell even after you clean the lint trap, or the dryer is suddenly cycling longer than it used to, ask a technician to camera the run specifically for fiberboard deterioration. A quick shop-vac pass will not catch it, and the lint pathway will stay partly blocked until the damaged section is replaced. We find this in San Bruno more than in any neighboring city because of the housing age and the way fog-driven humidity accelerates delamination. Call (980) 447-2498 and we will put a camera through your run and show you what is actually inside.
Yes, they often need attention at the same time in San Bruno. The same Gap-driven marine fog and SFO-adjacent aviation particulates that settle in your dryer vent also infiltrate your HVAC ductwork. If your dryer vent is clogged with salt-damp lint, your air ducts are likely carrying a similar load of particulate and microbial matter. We handle both, and the pricing is separate so you only pay for what your home actually needs. Call (980) 447-2498 and we will tell you what a combined inspection costs before anyone comes out.
Ask for camera footage of the full run after cleaning. Before we finish a job in San Bruno, we run a scope through the entire vent and show you the after footage, so you can see the metal walls clear of lint and salt crust. Then we give you the written record of what was removed. No fogging, no mystery. Every job comes with the 365-Day Done Right Promise in writing: if something is not right within a year, we come back and make it right. Call (980) 447-2498 for an inspection quote.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving San Bruno and the surrounding Peninsula communities since 2004.