Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Kenmore
Air duct repair in Kenmore usually means one of two things: sealing leaks in aging sheet-metal trunk lines, or replacing collapsed flex-duct runs that have failed in a damp crawl space. Most Kenmore homes were built in the 1960s and 70s, and their original ductwork is now past its design life, often carrying moisture from the Sammamish River corridor and fine dust from the city’s unpaved edges. We know where these systems fail and what it costs to fix them here. Call (980) 447-2498 for a straight answer and a written price before any work begins.
Why Linden Air Duct Cleaning Is Kenmore’s Preferred Air Duct Repair Company
Kenmore homeowners call us because we show up the way we said we would. Before any visit, you get the technician’s name and photo. At your door, that same person shows a photo ID badge. Every tech is background-checked and identity-verified under the Threshold Standard, and that has been our operating rule since 2004 as part of the Threshold Group family. No one enters your home without you knowing exactly who they are.
We also write the price down before work starts, every time. If a repair fails within 365 days, we return and make it right at no charge. That promise is written on every job, not implied. Kenmore homeowners dealing with failed crawl-space ducts, mold on flex jackets, and crimped connections tell us the same thing: the written guarantee is the reason they chose us over a cheaper quote.
Air Duct Replacement in Kenmore
Air Duct Replacement in Kenmore typically means pulling out collapsed or mold-damaged flex runs in a vented crawl space and installing new, correctly sized ductwork with sealed connections. Homes near the Sammamish River mouth, especially along 68th Ave NE, commonly show flex-duct jackets coated with mold and low-point sections holding standing water. When the jacket is compromised, replacement is the only repair that holds. A partial replacement of several failed runs in a Kenmore crawl space usually runs $850 – $1,900, while a full system replacement in a 1960s – 70s ranch can range from $3,200 to $6,800 depending on the number of supply and return runs and access difficulty.
When Replacement Beats Another Patch
If a flex run has visible mold on the exterior jacket or is holding water, sealing or patching it won’t solve the problem. The material is already compromised. Replacing the run and addressing the moisture source is the only repair that prevents a callback. We see this pattern repeatedly in crawl spaces bordering the Sammamish River corridor.
What Replacement Includes
Every replacement job includes new duct runs sized for your system, sealed connections, re-supporting sagging sections, and a written guarantee. We use professional-grade equipment from Rotobrush and Nikro for the cleaning side, and we re-seal main trunks with fresh mastic where needed. You get a price in writing before we touch anything.
Ductwork Repair in Kenmore
Ductwork Repair in Kenmore is what most older homes actually need: sealing failing mastic joints, repairing crimped connections, re-supporting sagging trunks, and patching small holes in sheet-metal runs. Original 1960s – 70s sheet-metal trunk lines develop failing mastic seals that leak conditioned air into the damp crawl space, and the negative pressure draws moist air right back into the system. Ductwork repair on a typical Kenmore ranch runs $350 – $1,100 for sealing and minor repairs, while more involved repairs that include replacing several flex connections and re-sealing the main trunk usually land between $900 and $2,400.
The Mastic Seal Problem
Mastic dries out, cracks, and separates over decades. When it fails on your trunk line, you’re paying to heat or cool the crawl space and pulling in ground moisture with every cycle. We strip old failing mastic, clean the joint, and apply fresh sealant that actually bonds. This one repair can cut the damp smell at your registers dramatically.
Crimped Flex Connections Near the River
In neighborhoods directly bordering the Sammamish River, crimped flex-duct connections wick ground moisture upward, breeding mold on the outer jacket and collapsing airflow at the air handler. A camera inspection shows exactly where the restriction is. Repairing those connections early saves you a full replacement later.
Trusted Brands We Service in Kenmore
We work on ductwork connected to all major HVAC brands, and we stock common parts and sealants used on Kenmore’s older sheet-metal and flex-duct systems, so turnaround is fast when you call. Our crews run professional-grade Rotobrush and Nikro extraction and camera equipment, and when air quality products are part of the fix, we install and service units from Aprilaire, Honeywell, and Abatement Technologies. You won’t wait weeks for parts we can’t source locally.
Common Air Duct Repair Problems We See in Kenmore Homes
- Mold on flex-duct jackets in crawl spaces near the Sammamish River. The lake-and-river corridor keeps crawl-space air humid for roughly half the year, and that moisture condenses on duct surfaces. Exterior jacket mold is so common along 68th Ave NE that we treat it as the default condition, not an exception.
- Abrasive sludge inside supply and return ducts. Unpaved-road dust and pollen from Kenmore’s rural edges mix with wood-heat ash from nearby properties and compact inside the ductwork. This damp, abrasive paste accelerates blower motor wear and degrades seals faster than a dust-only load would.
- Failed mastic seals on original sheet-metal trunks. 1960s and 70s ranch and split-level homes across Kenmore came with sheet-metal trunk lines sealed with mastic that has now cracked and separated. Those leaks pull moisture from the crawl space straight into your supply air.
- Collapsed flex runs with standing water in low points. We regularly find low-point sections holding water in crawl spaces near the river mouth. That water becomes a biological-growth source and eventually softens the duct jacket until the run collapses at the air handler connection.
Pricing for Air Duct Repair in Kenmore, NY
A typical ductwork repair in Kenmore runs $350 – $1,100 for sealing and minor fixes, while replacing several failed flex runs usually lands between $850 and $1,900. Full air duct replacement in a 1960s – 70s ranch ranges from $3,200 to $6,800. What drives the final number is access: low crawl spaces near the Sammamish River are wetter and tighter to work in than the higher, drier eastern edges of the city, and that affects labor. You get a written price before work starts, no exceptions, and every repair carries a 365-day written guarantee with a free second visit if the repair fails. Call (980) 447-2498 for an exact quote, free.
We Also Serve Cities Near Kenmore
Our crews work throughout the metro area around Kenmore, including Brooklyn, Queens, Manhattan, and Staten Island. If you’re in one of those areas, our Air Duct Repair team can help. This page is written specifically for Air Duct Repair in Kenmore, where the Sammamish River corridor and the city’s rural edges create a set of conditions we don’t see anywhere else.
Serving Kenmore, NY - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Kenmore
For a rural Kenmore property near the river, expect to inspect ductwork every 2 to 3 years and clean more often than the national average, with repair needs typically emerging on a 5 to 8 year cycle. The combination of lake-and-river corridor humidity and unpaved-road, wood-heat particulates compacts debris into a damp, abrasive sludge inside ducts, which accelerates seal failure and flex-run degradation faster than in higher, drier cities like Bothell or Kirkland. Call (980) 447-2498 and we’ll tell you what your system actually needs.
Because Kenmore’s position at the north end of Lake Washington, where the Sammamish River empties in, keeps crawl-space air humid for roughly half the year, and that moisture condenses on cooler duct surfaces. The exterior flex-duct jacket absorbs that condensation, especially in vented crawl spaces with direct ground exposure, and mold colonizes the surface. We see it most along 68th Ave NE near the river mouth, where the pattern is consistent enough that we now expect it on original 1960s – 70s systems. A camera inspection confirms it, and replacement of the affected runs is the reliable fix.
Yes. We service separate duct systems on outbuildings, workshops, and accessory structures across Kenmore’s rural outskirts, where unpaved-road dust and wood-heat ash load those systems heavily. Outbuilding ductwork often runs in unconditioned spaces with even less vapor control than a house crawl space, so the repair work is similar: seal failing joints, replace collapsed runs, and address the moisture source. We include outbuilding systems in the written estimate when we inspect your property, and the same 365-day written guarantee applies.
A duct repair visit at a Kenmore home starts with a camera inspection of the ductwork, including the crawl space, to identify failed connections, mold-damaged runs, separated mastic seals, and any standing water in low points. The technician then gives you a written price for the repair before any work begins. After approval, the repair covers sealing or replacing the damaged sections, re-supporting sagging runs, and cleaning where needed using negative-pressure extraction with HEPA filtration on Rotobrush or Nikro equipment. You get a written guarantee on every repair, and if it fails within 365 days, we return at no charge.
Expect failing mastic seals on the original sheet-metal trunk line, crimped flex-duct connections that have wicked ground moisture, and probably one or more low-point sections holding water if you’re anywhere near the Sammamish River corridor. In a 1970s Kenmore ranch, the supply and return ducts run through a vented crawl space where humid air sits for about six months of the year, so condensation-related damage is the norm. We see this configuration constantly, and most of those systems need sealing, connection repair, and at least partial flex-run replacement. Call (980) 447-2498 for a camera inspection and a written price before any work begins.
Contact Linden Air Duct Cleaning for Air Duct Repair in Kenmore
If you live in Kenmore and your registers smell damp, your airflow is weak, or you know your crawl-space ducts haven’t been looked at in years, call us. We’ll schedule a camera inspection, send you the technician’s name and photo before the visit, and put a written price in your hands before any work starts. Every repair is covered by the 365-Day Done Right Promise, with a free second visit if it doesn’t hold. Call (980) 447-2498 for a free estimate, and we’ll tell you exactly what’s going on in your ductwork and what it will cost to fix.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Kenmore since 2004.