Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Spokane
Air duct repair in Spokane typically runs $285 – $640 depending on whether we’re sealing a trunk line seam, replacing a crushed section, or reconnecting a disconnected run. Most Spokane homeowners call us after noticing weak airflow at far registers, rooms that never seem to warm up, or dust accumulating on furniture within days of cleaning. If you’re dealing with any of that, call (980) 447-2498 and we’ll talk through what’s likely going on before we ever send a truck.
We know Spokane’s housing stock. We know that a 1926 craftsman off Grand Boulevard and a 1962 ranch in the Valley fail in completely different ways. Our Air Duct Repair team sees both every week, and the fix is never the same job twice. That’s why we don’t quote over the phone and we don’t guess. We inspect, we show you what we found with a camera, and then we put a written price in front of you before any work happens.
Why Linden Air Duct Cleaning Is Spokane’s Preferred Air Duct Repair Company
We’ve been repairing ducts in Spokane long enough to know that the homes here don’t read like the homes in Seattle or Tacoma. South Hill, Browne’s Addition, the Garland District – these neighborhoods were built before forced-air was standard, which means the ductwork is almost always a retrofit. And a retrofit done in 1972, on a furnace that was already old, leaves problems a newer home never has. We know where to look first, and that saves you billable inspection time.
Every technician who shows up at a Spokane door is background-checked, identity-verified, and photo-badged under the Threshold Standard. Before your appointment, you get the tech’s name and photo sent to you. When they arrive, they show ID at the door. Marcus Veale, who leads our Spokane repair work, has walked hundreds of homeowners through what we find in their ducts – and he’s frank about what actually needs fixing versus what can wait. If a repair isn’t covered right, we come back within 365 days at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job.
Calls are answered by a live person 24 hours a day, 7 days a week. No voicemail loops when you’re standing in a cold house with a furnace running and one bedroom that won’t heat.
Ductwork Repair in Spokane
Ductwork repair in Spokane most often comes down to one of three findings: open seams pulling crawl-space air into the supply side, crushed or disconnected flex runs killing airflow to far rooms, or corroded galvanized joints that have gapped after decades of hard heating cycles. We cut out what’s failed, rejoin with sealed collars or insulated flex where appropriate, and seal accessible seams with mastic. The goal is airflow, not appearance – though we’ll leave the accessible sections looking like a human actually cared.
Sealing Trunk Line Seams
This is the repair we do most often in Spokane’s pre-1950 neighborhoods. Open seams at basement-ceiling trunk lines pull unfiltered air from crawl spaces and basements directly into what you’re breathing. We seal what we can reach with mastic and mechanical fasteners. That one step often does more for indoor air quality than a full cleaning.
Rejoining Disconnected or Crushed Runs
Disconnected runs are common in converted gravity-furnace systems, where oversized trunk lines were paired with whatever flex or sheet metal was on hand. We find them with a camera, then reconnect or replace the section. You’ll feel the difference at the far register immediately.
Duct Replacement in Spokane
Duct replacement in Spokane is the right call when the existing run is too far gone to seal – when galvanized duct in a 1960s Spokane Valley ranch home has corroded through, or when flex from a poorly done retrofit has collapsed and torn. We replace the section that’s failed, not the whole system, unless the whole system is genuinely shot. A partial run replacement in Spokane typically lands between $450 and $1,200, depending on length, access, and whether we’re working in a crawl space or a finished basement ceiling.
Replacing Corroded Galvanized Trunk Sections
Original galvanized ductwork in Spokane Valley tract homes was built for a heating system that has since run fifty-plus winters. Corrosion and gapping at joints is the predictable result. We replace the failed section with sealed, insulated modern duct and leave the rest alone if it’s still sound.
Swapping Collapsed Flex for Rigid or Insulated Flex
Retrofit flex runs often sag, kink, or collapse where installers took shortcuts. We pull the failed flex and run properly supported, insulated replacement. The difference in static pressure and register airflow is measurable on the spot.
Trusted Brands We Service in Spokane
We work on whatever you have, but we stock parts for the systems Spokane homes actually use. That means Aprilaire air cleaners, Abatement Technologies filtration, and Guardsman indoor-air-quality products. Our inspection and extraction equipment is Rotobrush and Nikro – commercial-grade gear that does source removal, not just surface dusting. That matters after wildfire smoke season, when the particulate load in Spokane ducts is heavier than anything we see west of the Cascades. Because we carry common fittings and collars locally, we’re not waiting a week on a parts order to finish your repair.
Common Air Duct Repair Problems We See in Spokane Homes
Every city has its own failure patterns. Here’s what we actually find in Spokane, week after week:
- Open seams on basement-ceiling trunk lines in pre-1950 conversions. South Hill and Browne’s Addition craftsman homes were built for gravity heat, and the forced-air retrofits left large-diameter trunk lines with seams that never got sealed. They pull crawl-space air into the supply side year-round.
- Volcanic-basalt dust coating duct interiors. Spokane sits on basalt, and the fine soil dust here is distinct – darker, finer, and heavier than anything in the Puget Sound region. When crawl-space air is pulled through open seams, that basalt dust ends up coating the inside of your ducts and blowing into bedrooms.
- Corroded original galvanized ductwork in Spokane Valley ranches. Homes built in the 1950s through the 1970s retain their original metal. After decades of hard heating seasons, the joints gap and the metal pits. We repair one joint and the next one fails within a year unless you address the run properly.
- Crushed or disconnected flex from cheap retrofits. When older Spokane homes were converted to forced air, some installers used undersized flex and didn’t support it. Runs sag, collapse, or pull apart at the collar. You get a room that never heats and a furnace working twice as hard.
Pricing for Air Duct Repair in Spokane, WA
A straightforward duct repair in Spokane – one seam sealed, one collar replaced, one short flex run reconnected – typically runs $285 – $640. A full section replacement in a finished ceiling or crawl space runs $450 – $1,200. If multiple failures are found, we give you a line-item list and you decide what gets done now and what can wait. Every quote is written before work starts. No per-vent pricing games, no surprise invoice after the fact. We don’t race to the cheapest number, and we don’t inflate the work either. If a repair we make doesn’t hold, we return at no charge for 365 days. Call (980) 447-2498 and we’ll give you an honest range over the phone after a few questions.
We Also Serve Cities Near Spokane
Our Spokane crews cover the immediate metro and surrounding communities, including Airway Heights, Mead, Medical Lake, and Cheney. If you’re in any of those areas and dealing with a failing duct run or a system that’s never worked right since you moved in, call us and we’ll schedule a camera inspection. Same team, same written pricing, same 365-Day Done Right Promise.
Serving Spokane, WA - Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Spokane
Because the trunk line is where Spokane’s older homes fail. In pre-1950 craftsman and colonial-revival homes, original gravity-furnace conversions left oversized sheet-metal trunk lines running across basement ceilings with seams that were never sealed. Those seams pull unfiltered crawl-space and basement air into everything downstream. Replacing a flex run without sealing those seams fixes one symptom and leaves the source. That’s why we camera-inspect the trunk first. Call (980) 447-2498 and we’ll explain what we’d look for in your home specifically.
Yes. From August through October, Spokane sits in an inland valley that traps wildfire smoke from the Cascades, the Idaho Panhandle, and Montana. Residents seal their homes and run HVAC continuously, pulling PM2.5 particulate deep into ductwork. Any repair we do in fall takes that load into account – we’re not just sealing a seam, we’re sealing a system that has been filtering smoke for six weeks straight. Without source removal of that particulate, even a properly sealed run will re-coat within a season. For an exact quote before smoke season hits, call (980) 447-2498.
Because original galvanized duct in 1950s – 70s tract homes has been through fifty or more Spokane winters of hard heating cycles, and the metal is simply tired. Joints gap, seams split, and corrosion pits the surface. If we patch one joint and don’t address the condition of the rest of the run, the next failure is a matter of when, not if. We’ll show you with a camera which sections are still sound and which are ready to fail, then let you choose how much to address now. Estimates are free.
Spokane sits on the Columbia River Basalt Group – ancient volcanic rock that weathers into a fine, dark, heavy soil dust. Because so many pre-1950 Spokane homes have open trunk-line seams at basement ceiling level, that basalt dust gets pulled into the duct system and coats the interior. We don’t see this in Puget Sound homes. If you open a return vent in an older Spokane house and see fine gray-black dust that feels almost gritty, that’s basalt, and it’s a sign the duct system is pulling unfiltered air from somewhere it shouldn’t. We can find the source and seal it.
Almost always, yes. Most Spokane repairs involve one failed seam, one crushed flex run, or one disconnected collar – not a system-wide failure. We replace sections only when the metal is corroded through or the flex has collapsed beyond saving. We’re not here to sell you a full duct replacement if you need one seal and a reconnection. Call (980) 447-2498 and tell us what you’re seeing; we’ll tell you honestly whether it sounds big or small before anyone shows up.
Call Linden Air Duct Cleaning for Air Duct Repair in Spokane
On a 1926 craftsman off South Hill’s Grand Boulevard, our tech camera-inspected a trunk line still paired to the original octopus-furnace conversion and found a disconnected run pouring basalt dust into the supply side. We cut in a new sealed collar, rejoined the crushed section with insulated flex, and sealed the open basement-ceiling seams we could reach. Airflow at the far registers jumped, and the dust load at the returns dropped immediately. That’s the kind of repair Spokane’s older homes need – and it’s the kind of work we do every week.
If your registers are weak, your dust never stops, or one room won’t heat, call (980) 447-2498. You’ll speak with a person, we’ll ask about your home, and we’ll schedule a camera inspection with a written price before any work begins. Marcus Veale and the Linden team know Spokane’s ducts better than anyone should – and we’ll show you exactly what we found before we touch a single screw.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Spokane under the Threshold Standard since 2004.