Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Wells Branch
Air duct repair in Wells Branch usually means one of three things: we find a crushed or disconnected flex run, we find original 1980s duct board shedding its liner, or we find a return leak pulling attic air into your system. Most repair jobs here run between $350 and $1,200 depending on what the camera inspection shows. We serve the whole Wells Branch area with the same written, up-front pricing we’ve used since 2004. Call (980) 447-2498 and you’ll speak to a live person, not a callback queue.
Why Linden Air Duct Cleaning Is Wells Branch’s Preferred Air Duct Repair Company
Wells Branch has a very specific housing story. Nearly every home here was built in the 1980s as part of a master-planned community, which means our techs see the same aging duct materials house after house. That repetition matters. When a technician has worked on two dozen other Wells Branch homes that share your floorplan’s original construction, they already know where the weak points tend to hide.
Homeowners here also tell us the same thing about who they let through the door. That’s why every Linden tech is background-checked, identity-verified, and photo-badged under the Threshold Standard. Before your visit, you receive the tech’s name and photo. At the door, they show a photo ID badge. No anonymous vans, no mystery workers. Marcus Veale leads our team with one rule: Wells Branch gets the same written price before work begins and the same 365-Day Done Right Promise after it ends, every single time.
Ductwork Installation in Wells Branch
Ductwork installation in Wells Branch typically replaces sections of original 1980s flex duct or rigid fiberglass duct board that have failed beyond repair. We see this most often on homes near Shoreline Drive and the streets east of Wells Branch Parkway, where original construction materials are now 35 – 40 years old. A full ductwork installation for an average 1,800 – 2,200 square foot Wells Branch home generally runs $4,500 to $9,000 depending on scope and access.
Replacing Failed Flex Duct Sections
Early-generation flex duct from the 1980s develops crushed runs and disconnected collars as the inner liner weakens. When that happens behind an air handler or above a finished ceiling, the fix is not duct tape. We replace the failed section with new, properly sealed flex and confirm airflow at every register before we call the job done.
Duct Board Removal and Retrofit
Original rigid fiberglass duct board delaminates over time. The facing peels back and sheds fiberglass into the supply air stream. If a camera inspection shows this in a Wells Branch home, the right move is removal of the failed section and retrofit with new insulated flex or sheet metal, not another cleaning pass.
HVAC Duct Installation in Wells Branch
HVAC duct installation in Wells Branch covers a larger scope than a partial repair: full supply and return runs for a new system, an addition, or a whole-home replacement. Homeowners near Bratton Lane and the neighborhoods around Katherine Fleischer Park ask us most often whether their 1980s ductwork is worth saving. Honest answer: if more than 30% of the runs show liner degradation, crushed sections, or leaks, replacement beats repeated repair. A complete HVAC duct installation for a typical Wells Branch home falls in the $6,000 to $12,000 range.
Full Supply and Return Replacement
This includes sizing new runs to the existing HVAC equipment, sealing every connection, and balancing airflow room by room. In Wells Branch’s older tract homes, that balance is often the single biggest difference between a system that struggles and one that holds temperature in every bedroom.
Return Air Upgrades for Older Homes
Many 1980s Wells Branch homes were built with a single undersized central return. That worked for a while. Now, with the near-year-round AC load in Central Texas, the system works harder than it was designed to. Adding a second return or enlarging the existing one is a common part of HVAC duct installation here.
Trusted Brands We Service in Wells Branch
We stock parts and materials compatible with the systems Wells Branch homes actually have. That includes professional-grade repair and sealing products from Rotobrush and Nikro, plus air-quality components from Aprilaire and Abatement Technologies. Because we work on so many 1980s-era duct systems in this community, we carry the fittings, collars, sealants, and replacement flex in our service vehicles so repair work on Shoreline Drive or off Bratton Lane doesn’t stall waiting on a parts run.
Common Air Duct Repair Problems We See in Wells Branch Homes
- Crushed or kinked 1980s flex runs. The inner liner weakens after four decades in a hot attic, and the run collapses. Rooms at the end of those runs get almost no airflow, even with the air handler running constantly.
- Delaminated duct board facing. Original fiberglass duct board peels its inner liner, and loose fiberglass blows through the vents. Homeowners often call thinking it’s dust, but it’s actual duct material breaking down.
- Disconnected collars at the air handler or return plenum. The original metal or plastic collars pull loose, and conditioned air dumps into the attic instead of the house. A camera inspection catches this in minutes.
- Pollen-loaded duct lining from Ashe juniper season. Wells Branch sits in a dense mountain cedar zone east of Mopac and west of I-35. From December through February, pollen gets pulled through the ducts and embedded in degraded lining where a standard cleaning can’t lift it.
Pricing for Air Duct Repair in Wells Branch, TX
Honest numbers, because you should know before you call. A single crushed flex run replacement in Wells Branch typically runs $350 to $600. Replacing a delaminated duct board section runs $500 to $1,200 depending on length and access. Full ductwork installation for an average Wells Branch home runs $4,500 to $9,000, and whole-home HVAC duct installation runs $6,000 to $12,000. Every job gets a written price before work starts and a written guarantee after. Call (980) 447-2498 for a free estimate and we’ll send the tech’s name and photo before we arrive.
We Also Serve Cities Near Wells Branch
Our team handles Air Duct Repair across the broader Central Texas region. While this page is written for Wells Branch homeowners, we also schedule repair and installation work in nearby cities including Houston, San Antonio, Dallas, and Fort Worth. Read more about our local service at Air Duct Repair in Wells Branch.
Serving Wells Branch, TX - Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Wells Branch
If you see visible dust or fiberglass particles blowing from your registers, or if some rooms don’t get airflow no matter how you adjust the dampers, your ducts likely need repair rather than cleaning. A camera inspection by a trained tech is the only way to know for sure. In Wells Branch specifically, most original 1980s homes have at least one failed flex run or delaminated duct board section by now. Standard cleaning won’t fix crushed flex or shedding liners. Call (980) 447-2498 to schedule an inspection.
It looks like a silver or grey flex tube that has collapsed on itself, often where it passes over a sharp edge in the attic or behind the air handler. A disconnected run looks like a gap between the flex and the metal collar it was supposed to attach to. We find these constantly in Wells Branch’s 1980s-era tract homes. The result is the same: heated or cooled air empties into the attic and your electric bill climbs while your back bedrooms stay warm.
Yes, and here’s why. Wells Branch sits in the heart of the Ashe juniper zone, and from December through February mountain cedar pollen loads are extreme. Homes here stay sealed with the HVAC recirculating constantly, which flushes enormous amounts of pollen through the ductwork. If your duct lining is already degraded, that pollen embeds in the damaged material where cleaning can’t reach it. Repair and sealing before cedar season starts makes a measurable difference. Call (980) 447-2498 for a free quote.
It depends on what the camera shows. If the facing is intact and only the connections are leaking, we can re-seal the section and restore its function. If the inner liner has delaminated and fiberglass is shedding into the air stream, that section should be removed and replaced. We won’t sell you a repair that won’t hold, and we won’t replace duct that still has life in it. You get a written assessment either way.
We follow NADCA standards on every duct cleaning and repair job we do, including all work in Wells Branch. That covers inspection protocols, repair methods, sealing standards, and cleanup. We also run professional-grade Rotobrush and Nikro equipment and use Aprilaire and Abatement Technologies air-quality products where they apply. Every repair carries the 365-Day Done Right Promise in writing, and if a covered repair fails, we return at no charge.
If your Wells Branch home has airflow problems, visible debris at the registers, or ducts that have simply never been inspected since the 1980s, call us at (980) 447-2498. We’ll schedule a camera inspection, send you the tech’s name and photo before the visit, and put the repair price in writing before any work begins. No surprises after the fact, and a written guarantee on every repair.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Wells Branch and surrounding Central Texas communities.