Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterLennox Air Duct Cleaning in Columbus, CA | Linden Air Duct Cleaning
We clean and repair air ducts on Lennox systems across Columbus, and we’re independent, not a manufacturer-authorized shop. That matters because we’ll tell you straight when a duct cleaning will solve your problem and when it won’t. Here’s the part most Columbus Lennox owners don’t know until we open the system: your ductwork condition, not the furnace itself, is often what’s choking your airflow and sending your energy bill up. Call (980) 447-2498 for a free estimate.
Why Columbus Residents Choose Us for Lennox Service
We’ve worked on Lennox equipment in Columbus since the 1990s, back when Pulse furnaces were the new thing going into every east-side ranch. Marcus Veale, our owner, came up through the HVAC program at Los Angeles Trade-Technical College and has spent more than a decade pulling apart duct systems that other companies walked past. He’d tell you the same thing we tell every customer: a Lennox furnace is only as good as the ducts feeding it. We service the full Lennox line across Columbus, from Clintonville craftsmans to Grove City ranches to the new builds in New Albany. Our techs know the duct and coil configurations on Lennox equipment, so we don’t waste your time figuring out what’s in front of us. We show up with the right tools, we price the job in writing before anything starts, and we stand behind the work for 365 days. Every tech is background-checked, identity-verified, and you’ll get their name and photo before they ring your bell.
Common Lennox Air Duct Cleaning Problems We Solve in Columbus
Here’s what we actually see when we open Lennox systems in Columbus homes:
- Slab-duct moisture feeding evaporator coil growth. In the 1960s and 70s ranches across Whitehall and Reynoldsburg, supply ducts were cast right into the concrete slab. Ground moisture wicks up through those ducts and hits the Lennox evaporator coil, which breeds biological growth that chokes airflow and drives up static pressure. We clean the coil and address what we can in the duct, then tell you honestly if a mold assessment is the next step.
- Pulse heat exchanger strain from clogged returns. Lennox Pulse furnaces were workhorses in 1980s Columbus subdivisions, but their heat exchangers don’t tolerate restricted airflow. Central Ohio’s spring and fall pollen seasons dump a lot of particulate into return ducts. When those returns clog, the Pulse runs hot, short-cycles, and over years that cracks heat exchangers. Clean ducts won’t fix an already-cracked exchanger, but they’ll keep a good one from failing early.
- Merit and Elite blower wheel dust buildup. The PSC blower motors in Lennox Merit and Elite air handlers collect dust on the wheel, especially in OSU-area rentals where filters get changed once a year if at all. A dust-caked blower wheel throws itself out of balance, drops airflow, and makes the whole system louder than it should be. We pull the wheel, clean it, and check the motor’s performance while we’re in there.
- Signature series pressure-switch errors. Lennox Signature modulating furnaces with communicating thermostats are sensitive machines. When the condensate trap or flue gets partially blocked by lint and pollen, which happens a lot in southwest Columbus crawl-space installs, the system throws pressure-switch errors and won’t fire. Duct and flue cleaning often clears that up without a parts replacement.
- Rental and flipped-home neglect. Columbus’s OSU-area rental stock and quick flips have Lennox systems that haven’t seen duct cleaning since original installation 40 or 50 years ago. By the time we’re called, the return side is caked, supply registers are half-blocked with furniture-compacted dust, and the whole system is working against itself. We’ve cleaned systems like that and watched static pressure drop by half.
Lennox Service in Columbus: What Local Conditions Mean for Your Equipment
Columbus has a ductwork problem most cities don’t. In the postwar building boom, thousands of east-side ranch homes went up on slab foundations with supply ducts cast directly beneath the concrete floor. Whitehall and Reynoldsburg are full of them. Those underground runs wick ground moisture twelve months a year. By the time a Lennox system is 40 or 50 years old, those slab ducts are holding standing water and a thin sediment layer from decades of ground-contact condensation. We recently handled Columbus Air Duct Cleaning for a Lennox Elite EL296 system in a 1968 ranch off East Main Street in Whitehall where the homeowner told us about musty odors and uneven airflow. Our video inspection found standing water inside the perimeter ducts. We used low-pressure flushing to move what we could, referred the homeowner for a mold assessment before we’d close out the job, then cleaned the evaporator coil and sealed what duct joints we could reach. The furnace ran noticeably quieter after, and static pressure dropped. Standard truck-mount negative-pressure cleaning cannot fully remediate that kind of slab-duct saturation. Anyone who tells you otherwise hasn’t looked inside one. Marcus has said plenty of times: clean ducts don’t fix everything, but dirty ones can quietly make a lot of things worse. Slab ducts in Columbus are the quiet kind.
Lennox Models & Products We Service in Columbus
We work on the Lennox equipment Columbus homes actually have. The Pulse G14 and GSR14 furnaces that went into 1980s and 90s ranch subdivisions. The Elite EL280 and EL296 retrofits common in older Clintonville and German Village homes. The Merit ML180 and ML193 builder-grade units scattered through 2000s outer-ring construction in New Albany and Powell. The Signature SL280 and SLP98 modulating furnaces in newer high-efficiency Columbus homes. For parts, we stock OEM-equivalent aftermarket blower motors, control boards, and igniters for the common Lennox failures, and we source genuine Lennox parts when a proprietary component is required. We disclose which one we’re installing and why. If your Lennox air handler is 15-plus years old with a cracked heat exchanger or a failed ECM motor, we’ll give you a straight repair-versus-replace comparison. We’re not here to sell you a furnace you don’t need. See our broader Lennox sales & service page for more on how we handle the full line.
Lennox Service Pricing in Columbus
Whole-system air duct cleaning on a Lennox system in Columbus typically runs $400 to $800, depending on home size, number of returns, and how long the system has gone without service. Evaporator coil cleaning adds $150 to $300 when we’re already in the system. Duct sealing runs $300 to $900 depending on accessible duct length and the sealing method. Video inspection is $75 to $150 as a standalone, and we roll it into the cleaning at no extra charge when we’re already on site. Slab-duct homes in Whitehall or Reynoldsburg may push toward the upper end of the range because those underground runs take longer to address properly and sometimes require a mold-assessment referral before we can finish. We also offer Dryer Vent Cleaning - Columbus for homes in these areas. Every quote is one flat price per system, written before work starts, no per-vent pricing, no door-knock upsells. You’ll see before-and-after photos of your own ducts. If it’s not right within 365 days, we come back and make it right. Written on every job. Call (980) 447-2498 to get an exact number for your Lennox system.
Serving Columbus, OH - Our Local Coverage Area
We’re based in the Columbus area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Columbus
Partially, and we’ll be upfront about what we can’t get. Slab-embedded perimeter ducts can’t be fully cleaned with standard rotary-brush equipment because they’re cast beneath the concrete floor. We use low-pressure flushing to move standing water and sediment, then seal what we can access. If our video inspection shows biological growth we can’t remediate, we refer you for a mold assessment before closing the job. Give us a call at (980) 447-2498 and we’ll talk through your specific layout.
Because central Ohio’s pollen load spikes in those seasons, and your ductwork and evaporator coil are catching a lot of it. When pollen collects on a damp coil or inside humid slab ducts, it feeds microbial growth that releases that musty odor into your air. Spring and fall also bring humidity swings from the Scioto and Olentangy river confluence, which makes it worse. Cleaning the coil and ducts, and addressing moisture in the system, is what stops it.
It depends on the component. For common parts like blower motors, control boards, and igniters we stock OEM-equivalent aftermarket parts that meet or exceed spec and cost less. For proprietary Lennox components, we source genuine Lennox parts. We tell you which one we’re installing and why before any work starts, in writing.
Yes, and it’s more common in Columbus than you’d think. When return ducts clog with pollen and debris, airflow drops and the Pulse heat exchanger overheats, which trips the limit switch and shuts the furnace down early. That’s short cycling. Continued short cycling stresses the heat exchanger over time. We clean the returns and check airflow, but if the heat exchanger is already cracked, you need a safety evaluation, not just a cleaning. Call (980) 447-2498 and we’ll diagnose it honestly.
Every 3 to 5 years for most Columbus homes, and more often if you live in a slab-duct ranch, have pets, or anyone in the house has allergies or asthma. Columbus’s high-pollen seasons mean particulate builds up faster here than in cities without surrounding agriculture. If your system hasn’t been cleaned in 20 years, which we see often in older east-side homes, do it once now and then settle into a reasonable interval.
Service Areas Near Columbus
We serve Columbus and the surrounding communities. If you’re in Whitehall, Reynoldsburg, Grove City, Hilliard, or Clintonville, we’re in your neighborhood regularly. For our Columbus service area details, see the full coverage page. Columbus sits between Lennox service in San Francisco territory and Lennox service in Seattle coverage in our broader service map, but our local focus is right here in central Ohio.
Book Your Lennox Service in Columbus Today
Call (980) 447-2498 and a real person answers, any time of day. We’ll schedule your Lennox duct cleaning, send the tech’s name and photo before the visit, and put your price in writing before any work begins. Free estimates.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Columbus since 2004.