Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Tacoma
Dryer vent cleaning in Tacoma typically costs $145 – $285 for a single-family home, and $185 – $375 when a shared multifamily stack is involved. Most jobs take 60 – 90 minutes. If your dryer is taking two cycles to dry a load, pushing lint back into the laundry room, or leaving a musty smell on towels, the vent is the first place we look. We serve every Tacoma neighborhood, from the North End to South End, Hilltop to Proctor, with crews who know this city’s older housing stock. Call (980) 447-2498 and a real person answers, any hour, any day.
Why Linden Air Duct Cleaning Is Tacoma’s Preferred Dryer Vent Cleaning Company
Tacoma homes are not like suburban Pierce County homes. Our Dryer Vent Cleaning team works in Craftsman bungalows with damp crawl spaces, 1920s apartment stacks in the Stadium District, and postwar ramblers near the Port. That local familiarity means we know what a Tacoma dryer vent actually looks like inside: flex duct that sags in a dirt-floor crawl, shared vertical stacks packed with decades of lint, and return plenums coated with the darker particulate that settles in neighborhoods near the old smelter corridor.
Every technician who comes to your door is background-checked, identity-verified, and photo-badged under the Threshold Standard. Before the visit, you get the tech’s name and photo. At the door, they show a photo ID badge, every time. We know that letting someone into your home is a real decision. We make it a decision you can verify before you open the door.
Our price is written before any work begins. No per-vent pricing, no surprise invoice at the end. And the work is backed by the 365-Day Done Right Promise, in writing, on every job. If it’s not right, we make it right.
Dryer Vent Installation in Tacoma
Dryer Vent Installation in Tacoma usually means one of two jobs: replacing a flexible transition hose that has sagged or failed, or installing a complete new vent run from the dryer to an exterior termination. In Tacoma’s older homes, we often find flex duct that was never fastened properly, crushed behind the dryer, or run through a damp crawl space where it has disconnected entirely. A new installation with rigid metal duct and proper support costs between $220 and $480 depending on run length and access. You get the written price before we start.
Transition Duct Replacement
The short run from dryer to wall is the most common failure point. In tight Tacoma laundry closets, homeowners shove the dryer back and kink the hose without realizing it. We replace it with rigid or semi-rigid metal that holds its shape and moves air the way it should.
Full Vent Run Installation
When the entire run needs replacing, usually because it’s old flex in a crawl space, we route new rigid metal duct, support it every four feet, and seal every joint. In vented dirt-floor crawl spaces under North End bungalows, we often add a short rigid section through the floor and insulate the run to reduce condensation. Tacoma code requires a minimum 4-inch diameter duct, and we meet or exceed that on every installation.
Dryer Vent Repair in Tacoma
Dryer Vent Repair in Tacoma covers crushed duct, disconnected joints, failed vent caps, damaged wall or roof terminations, and sagging runs that trap lint. We repair what’s salvageable and replace what isn’t. Typical repairs in Tacoma run $160 – $340, which includes camera inspection to confirm airflow after the fix. You know the price before we touch anything.
Sagging or Disconnected Crawl Space Runs
In Tacoma’s 1900s – 1930s homes, dryer exhaust often runs through a vented, dirt-floor crawl space. Moisture causes the flex to sag, lint collects at the low point, and eventually the duct pulls apart. The dryer still runs, but the air and lint go into the crawl space, not outside. We re-support the run with strapping and replace damaged sections with rigid metal.
Vent Cap and Bird Guard Repair
Damaged exterior vent caps let rain in and give birds and rodents an entry point. We replace broken caps, install bird guards where needed, and verify the flap opens and closes correctly. A closed or stuck flap is a lint trap and a moisture source all at once.
Trusted Brands We Service in Tacoma
We work on dryer vents connected to every major dryer brand: Whirlpool, Maytag, LG, Samsung, GE, Kenmore, and Electrolux. For the cleaning and extraction side, we run professional-grade Nikro negative-pressure equipment that pulls lint out rather than blowing it around. For indoor air quality work tied to duct systems, we use products from Honeywell and Aprilaire. If we need a replacement part for your Tacoma home, we carry common sizes on the truck, which means most repairs happen in a single visit.
Common Dryer Vent Cleaning Problems We See in Tacoma Homes
- Shared vertical stacks in multifamily buildings. A single clogged stack in a Stadium District or North End apartment building backs lint and moisture into multiple units. Cleaning only the unit’s transition duct leaves the stack packed, and the problem returns within months.
- Damp crawl space vent runs. Tacoma’s 37 inches of annual rain keeps dirt-floor crawl spaces damp all winter. Flex duct in that environment sags, absorbs moisture, and collects lint fast. The restriction is often in the crawl space, not behind the dryer.
- Tight laundry closets with kinked transition hose. In older Tacoma homes, the dryer alcove was never designed for a modern appliance. Homeowners push the dryer back, the hose kinks or crushes, and airflow drops by half or more.
- Failed exterior vent caps and bird entry. Wet Tacoma winters corrode cheap vent caps fast. Once the flap fails, birds nest in the opening and a plug of nesting material, lint, and debris cuts airflow completely.
Pricing for Dryer Vent Cleaning in Tacoma, WA
For a standard single-family home in Tacoma, dryer vent cleaning runs $145 – $285. Shared-stack multifamily jobs run $185 – $375, depending on the number of units served and roof or wall access. Vent repair adds $160 – $340, and a full vent installation runs $220 – $480. The factors that move the price: run length, crawl space access, whether the termination is roof-level or wall-level, and whether a shared stack is involved. You will never pay a per-vent fee. You will never get a surprise invoice. Call (980) 447-2498 for a free estimate, and we will put the exact number in writing before any work begins.
We Also Serve Cities Near Tacoma
Our crews handle Tacoma and the surrounding communities daily. That includes Milton, University Place, Puyallup, and Federal Way. If you live in one of those cities and your dryer is slow or your vent has not been cleaned in years, call (980) 447-2498 and we will schedule you for the same week in most cases.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Tacoma
Yes. We clean the full stack from the roof or wall termination down through each connected unit. A camera inspection shows us where the lint is compacted, and we set up negative pressure at the termination to pull debris out without blowing it into neighboring units. Call (980) 447-2498 and we’ll coordinate access with your property manager.
The vent is almost certainly restricted somewhere between the dryer and the outside. In Proctor and other older Tacoma neighborhoods, the restriction is often in the crawl space run, where flex duct has sagged or disconnected. We inspect the entire run with a camera and fix the actual restriction, not just the visible part. Call (980) 447-2498 and we’ll find it.
Tacoma’s persistent humidity and rain mean the inside of a dryer vent stays damp longer than it would in a drier climate. Lint absorbs that moisture, sticks to the duct wall, and hardens over time. The same moisture corrodes vent caps and weakens flex duct in crawl spaces. This is why Tacoma vents clog faster than vents in drier parts of the state, and why annual cleaning matters more here. Call (980) 447-2498 to schedule.
Yes. When a shared vertical stack is packed with lint, positive pressure from a running dryer can push lint and moisture through gaps in the stack and into adjacent units. We saw this in a Stadium District building on North 21st Street, where a top-floor tenant’s dryer was pushing lint onto a lower unit’s bathroom ceiling. The fix was a full stack cleaning and a rigid-metal replacement of the sagging transition duct. If you see lint where it should not be, call (980) 447-2498.
Yes. We replace failed flex duct, install new rigid metal runs, repair vent caps, and add bird guards. Older Tacoma homes often need a full run replacement because the original flex duct has sagged, crushed, or disconnected in the crawl space. The price is written before we start, and repairs are covered by a written guarantee with a free second visit if the fix does not hold.
A Note on Shared Stacks and Dense Tacoma Housing
In Tacoma’s dense North End, Stadium District, and Proctor multifamily buildings, dryer exhaust is often shared through a vertical stack serving stacked units. A single clogged lint pathway can back lint and moisture into neighboring apartments rather than just one unit. This configuration is rare in suburban Pierce County, and it changes the scope of the job: a camera inspection and source removal at the roof or wall termination are often required, not just a quick cleaning at the unit’s transition duct. Cleanings that stop at the unit leave the stack packed, and the problem returns within months. Our crews carry ladders, camera equipment, and extraction tools through shared stairwells and restricted parking areas in these neighborhoods regularly, and we schedule the access properly with property managers, so the job gets done fully the first time.
Call Linden Air Duct Cleaning for Dryer Vent Work in Tacoma
If your dryer is slow, your laundry room smells musty, or you have not had the vent cleaned in years, call (980) 447-2498. A live person answers, any hour. We will give you an honest price range over the phone, schedule a visit, and send you the technician’s name and photo before they arrive. When they show up, they will show a photo ID badge at the door. The price is in writing before any work starts, and the work is covered by the 365-Day Done Right Promise. That is how we do business in Tacoma.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Tacoma homeowners with verified dryer vent and air duct services.