Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Repair Across Town and Country
Air duct repair in Town and Country, WA typically runs $350 – $850 for most targeted fixes, with full-system sealing or section replacement on larger custom homes reaching $1,200 – $2,400. That’s the honest range before we ever step foot on your property, and you’ll have it in writing before any work begins. We know the homes here: the 1960s-to-early-2000s custom builds along the Spokane River valley, the long trunk-and-branch runs, the multi-return zones that hide problems in secondary ducts. If you’re noticing weak airflow in one part of the house, dust blowing from registers, or rooms that never quite heat or cool right, call (980) 447-2498 for a free estimate.
Why Linden Air Duct Cleaning Is Town and Country’s Preferred Air Duct Repair Company
Town and Country homes aren’t like typical Spokane tract housing. The square footage runs 3,000 to 6,000-plus, systems are zoned, and duct runs are long enough that a small leak or crushed section can go unnoticed for years while it quietly siphons conditioned air into an attic or crawlspace. Homeowners here call us because we understand that complexity. Marcus Veale, who leads our repair team, has spent years working on exactly these systems: original trunk-and-branch layouts, multiple returns per zone, and the specific way Palouse loess dust and wildfire smoke ash settle into secondary runs. We’re part of the Threshold Group family, operating to the Threshold Verified standard since 2004. That means every technician who arrives at your door in Town and Country is background-checked, identity-verified, and photo-badged. You get their name and photo before the visit, and they show a photo ID at the door. Every time.
Ductwork Installation in Town and Country
Ductwork installation in Town and Country usually means one of three things: replacing a collapsed or crushed run, adding a new run when a room addition or remodel changes the layout, or correcting original ductwork that was undersized or poorly sealed from day one. In homes built between the 1960s and 1990s, we regularly find flex runs in attics that have been flattened by stored boxes, or rigid sections whose mastic seals have cracked and separated after decades of Inland Northwest temperature swings. If the duct itself has failed, patching won’t hold; replacement is the honest fix.
Replacing Failed Runs
When a duct run collapses, airflow to that zone drops sharply, and the system compensates by working harder everywhere else. We remove the failed section, install properly sized and sealed replacement duct, and verify airflow with a camera inspection after the job. On Town and Country’s larger homes, this often means working in attics and crawlspaces with limited access, which is part of why our pricing here reflects real labor, not bargain-basement ballpark numbers.
Sealing and Reconnecting
Loose boots, failed foil tape, and cracked mastic at trunk takeoffs are the most common ductwork installation repairs we perform in Town and Country. A disconnected boot at a register lets conditioned air pour into a crawlspace while pulling in dust, garage fumes, or smoke particulate. We clean the joint, re-seat it, apply fresh mastic and proper mechanical fasteners, then test the seal under system pressure.
Duetwork installation in Town and Country typically runs $450 – $1,800 depending on how much of the run must be replaced and how accessible the attic or crawlspace is. Whole-trunk replacement on a large custom home can reach $3,500 or more, and you’ll get that figure in writing before we start.
HVAC Duct Installation in Town and Country
HVAC duct installation in Town and Country differs from simple repair because it involves running new duct from the air handler or furnace to registers, not just fixing what’s already there. Homeowners here choose this when a remodel adds square footage, when original 1970s ductwork was installed with undersized returns that starve the blower, or when decades of accumulated damage make repair uneconomical. We size the duct to the system’s actual CFM requirements, not to whatever was easiest to run forty years ago.
Return Air Corrections
Many larger Town and Country homes were built with oversized supply runs but undersized returns, especially in upstairs zones. That imbalance forces the blower to work against pressure it wasn’t designed for, shortening its life and making rooms uncomfortable. Installing properly sized return duct, or adding a secondary return where none was originally planned, is one of the highest-impact fixes we perform here. It changes how the whole house feels.
New Zones and Additions
When a Town and Country homeowner converts a bonus room or builds an addition, the existing system rarely has capacity to absorb the new square footage without new duct. We run new supply and return lines, install dampers where zoning makes sense, and seal everything to the same standard we’d want in our own homes. HVAC duct installation in Town and Country for a standard addition runs $1,200 – $4,000, depending on run length, access, and whether zoning controls are included.
Trusted Brands We Service in Town and Country
We work on all major residential HVAC equipment, and when repairs require new components, we stock and source parts compatible with the systems most common in Town and Country’s custom homes. That includes professional-grade extraction and inspection equipment from Nikro, plus air-quality products from Honeywell and Aprilaire when a repair upgrades into filtration or whole-home air management. We don’t push brand replacements just to pad the invoice. We fix what’s fixable, recommend replacement only when the duct or component has genuinely failed, and keep commonly needed parts on our trucks so a single visit handles most jobs. For Town and Country homeowners with older systems, that availability matters.
Common Air Duct Repair Problems We See in Town and Country Homes
- Crushed or disconnected flex runs in attics and crawlspaces. Large homes on spacious lots often have deep attic spaces used for storage, and stored boxes or holiday decorations routinely crush flexible duct runs. A crushed run can cut airflow to a room by half or more while you never see the damage.
- Failed seals at trunk-and-branch joints in original 1960s – 1990s ductwork. The mastic and foil tape used in Spokane Valley construction of that era breaks down over decades of temperature cycling. When seals fail, conditioned air leaks into unconditioned spaces, and the system pulls in wildfire smoke, crawlspace dust, and whatever else drifts through.
- Blower vibration loosening fasteners and separating register boots. Oversized systems in large homes run hard, especially during July through October when smoke season forces continuous operation. Vibration works screws and fasteners loose, and registers separate from their boots, so airflow spills behind walls instead of into rooms.
- Multi-return systems with hidden secondary-run buildup. Homes with returns in multiple rooms collect Palouse loess, pet dander, and smoke ash in secondary runs that many contractors miss entirely. Airflow reads fine at the register, but the ducts are carrying a load of accumulated particulate that never gets addressed.
Pricing for Air Duct Repair in Town and Country, WA
Air duct repair in Town and Country runs a broad range because these homes span 3,000 to 6,000-plus square feet and systems vary from original 1960s layouts to 2000s zoned builds. A straightforward repair, like resealing a boot or reconnecting a single run, typically costs $350 – $650. Replacing a crushed flex run or rebuilding a trunk takeoff runs $700 – $1,800. Whole-system sealing, return-air correction, or multi-run replacement on the largest homes lands between $1,500 and $4,000. The variables are access, run length, and whether we’re working in finished spaces that require care around trim and drywall. Every quote is a written, flat price per system before work starts. No per-vent games, no surprise invoices. Call (980) 447-2498 for a free estimate and we’ll give you the real number for your house, not a teaser.
We Also Serve Cities Near Town and Country
While this page focuses on Town and Country, our crews handle Air Duct Repair work throughout the greater region. That includes Seattle, Spokane, Tacoma, and Vancouver communities. If you’re located outside Town and Country proper, we likely still cover your area, and the same written-price and Threshold Verified standards apply. Call and we’ll confirm coverage for your address.
Serving Town and Country, WA - Our Local Coverage Area
We’re based in the Town and Country area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Repair in Town and Country
In Town and Country, we recommend cleaning every 2 to 4 years for most homes, moving toward the 2-year end if you’re on a gravel road, heat with wood, or run your system through wildfire smoke season from July to October. The Palouse loess that blows in on southwest winds loads ducts year-round, and smoke events add a layer of particulate that accumulates faster than in west-side cities. After a heavy smoke season, have the ducts assessed even if you’re not at the two-year mark.
In a multi-return zoned home, repair almost always means inspecting and addressing the whole system under negative pressure, not just the one register where you notice a problem. Our team runs a camera through trunk and branch runs, checks every return, and tests seals at joints and takeoffs. Because secondary runs hide buildup and damage that routine cleaning misses, we clean and repair under controlled negative pressure with HEPA filtration so what we pull out doesn’t re-enter your living space.
Yes. Many Town and Country properties include detached shops, garages, or guest quarters with their own ducted heating or cooling systems, and those systems see the same dust loading as the main house, often worse because they’re closer to unpaved drives and open land. We repair and clean shop and outbuilding ductwork with the same written pricing and guarantee we give on the house. If the building is on the same property, we can typically handle both in the same visit.
If you notice weak airflow in a specific room while others blow hard, dust accumulating quickly on surfaces, a musty or smoky smell when the system kicks on, or rooms that refuse to hold temperature, you’re probably looking at damaged ductwork rather than just dirty ducts. Indications like a visible crushed flex run in the attic, separated joints you can see from the crawlspace access, or registers that wiggle free from their boots are repair issues. Cleaning won’t fix a structural failure.
Yes. We follow NADCA standards for source-removal cleaning and duct repair practices on every job in Town and Country, including negative-pressure extraction and post-repair camera verification. Our equipment is professional-grade from trade-trusted brands including Nikro, and every repair comes with a written guarantee and a free second visit if the repair does not hold. If your system was never designed or sealed to current standards, we’ll tell you honestly in plain language what that means for your home.
What Makes Town and Country Ductwork Different
Town and Country sits in the Spokane River valley, and that geography shapes how these homes load up with particulate. Fine Palouse loess blows in from the southwest, dry summers bake dust into circulation, and wildfire smoke from eastern Washington and Idaho settles into the valley from July through October. Systems here run hard to cool large, well-insulated custom homes, and that continuous operation cycles smoke ash and loess through the duct network over and over. Add in the number of homes that heat with wood stoves or fireplaces, and you get a particulate load that’s heavier and chemically stickier than what homeowners west of the Cascades ever see. A repair call in Town and Country almost always reveals ducts that need cleaning as part of the repair itself, because the buildup is part of why the system failed. We handle both in the same visit.
One homeowner on South Greenridge Drive called about weak airflow in an upstairs zone of their 5,200-square-foot 1980s multi-return system. The problem wasn’t the blower or the zone dampers; our tech found a collapsed flex run at a trunk takeoff, crushed by attic storage. We patched the main trunk, reconnected the run with a new boot, and cleaned the zone under negative pressure with HEPA filtration. A camera inspection confirmed restored airflow and no remaining Palouse dust or smoke ash in the return. That’s the kind of job that defines repair work in Town and Country: the visible symptom points one direction, but the actual failure is hidden deeper in the system. If you’ve got airflow problems this season, call (980) 447-2498 and we’ll find the real cause. Free estimates, written pricing, and the 365-Day Done Right Promise on every repair. Town and Country homeowners can also review our full service area and expanded local guides.
Written by Marcus Veale, Owner at Linden Air Duct Cleaning, serving Town and Country and the surrounding region since 2004.